Product Details
Bubble Magus Kalkwasser Stirrer KA-100
Rated for Aquariums up to 150 Gallons
Footprint: 6″ x 6″ | Body Diameter: 4″ | Height: 19″ | Base Diameter: 6"
Requires control timer and feed pump
Bubble Magus Kalkwasser Stirrer KA-150
Rated for Aquariums up to 300 Gallons
Footprint: 8″ x 8″ | Body Diameter: 6" | Height: 23″ | Base Diameter: 8"
Requires control timer and feed pump
Product Description
CO2 is by far the number one cause to low pH in household aquariums. Ambient CO2 can vary from building to building and depending on your location it may not be practical to keep your windows open or pull fresh air from outside into the skimmer. By relocating your protein skimmer?s air intake from the silencer over to the CO2 scrubber can actually increase your tanks pH by a couple points. Depending on the amount of ambient CO2 in the room it is not uncommon for tanks to raise from 7.8 pH up to 8.3 pH within a couple days but results can vary.Size S 1L: 100x100x200mmSize M 2L: 100x100x350mmSize L 3L: 120x120x350mmSize XL 5L: 160x160x320mm
Product Description
QANVEE Fluidized Moving Bed Filter Bubble Bio Media Reactor for Aquarium Fish Tank with Air Stone and Sponge Filter
Self Cleaning Filter Media constantly moving around and rub against each other only letting the strongest nitrifying bacterla survive
Simply Hook up to an Air Pump and getting all the benefits of oxygen in the water and a super charged bio filter.
Oxygen Rich Water combined with strong nitrifying bacterla handle large amounts of ammonia and nitrite compare to other type of filter
Easy to Remove Intake Sponge provides additional physical filteration
Comes with Enough Media similiar to K1 micro will float at first and start tumbling in a few days
Package including:LH-300 Filter Filter media(1/2 bottle)Air stone inside2 sponge filters (One replacement)4 strong suction cupsLH-300: 2.6" x 7.4"
LH-300 Size: 189mm*67mm*88mm= 7.4''×2.6''×3.5'' ( 3.5'' including suction cups)
Package including:LH-600 Filter Filter media(1/2 bottle)Air stone inside2 sponge filter(One replacement)4 strong suction cups
LH-600 Size: 224mm*79mm*100mm= 8.8''×3''×4'' ( 4'' including suction cups)
Product Description
NEW MODEL! NEW DESIGN!!!
A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.
3 SIZES TO MEET YOUR NEEDS
AquaForest AF Series Media Reactors are available in 3 sizes: Small (AF90), Medium (AF110), and Large (AF150). Although the Large AF150 reactor is only 15 cm (5.91 inches) taller than the Small AF90, it has 350 times the media storage capacity!
Detailed Specifications
AF90 Media Reactor
AF110 Media Reactor
AF150 Media Reactor
Body Size
90mm/3.54"
110mm (4.33”)
150mm (5.91”)
Height
30cm (11.81”)
39cm (15.35”)
45cm (17.72”)
Connections
16mm
20mm
20mm
Media Capacity (L)
1.6L
3L (6.34 US pt)
7.2L (1.91 US gal)
Width of Cylinder (cm)
13cm (5.12”)
15cm (5.91”)
19cm (7.48”)
Product Description
The Reactor is made entirely from high quality material PVC not acrylic, making it resistant to damage and discolouration.
Seatorch’s media reactor works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the solid build, it can be used both internally in the sump or externally
Specification:RF-15- Height: 500mm- The width of the cylinder: 110mmm-Connections: 20mm- Capacity up to: 1.5L- Suitable for both marine & freshwater aquariums
RF-25- Height: 500mm- The width of the cylinder: 125mmm-Connections: 20mm- Capacity up to: 2.5L- Suitable for both marine & freshwater aquariums
RF-30- Height: 550mm- The width of the cylinder: 125mmm-Connections: 20mm- Capacity up to: 3L- Suitable for both marine & freshwater aquariums
Product Description
Fauna Marin Skim Breeze Reactor is a special air filter used for connecting to the air inlet of a protein skimmer for air purification and CO2 reduction.
Size Skim Breeze Reactor :height: 29 cmBase plate: 9,5-10 cm diameter
How to useTo fill the filter, loosen the screw slightly, insert the appropriate hose adapter for the protein skimmer and close the filter cover.
Usage of the Skim Breeze granulateDo not submerge or expose the granules to water. Do not inhale dust, use gloves, and eye protection when filling reactor with Skim Breeze granulate.
Please observe the dosage instructions of the Skim Breeze granulate.
Fauna Marin Skim Breeze is a special adsorbing granule used for purifying the air pulled-in by protein skimmers.
Through skimmer air purification, your aquarium’s pH value will increase and become more stable. By reducing nutrients, algae growth is significantly reduced and coral growth is increased. Our high performance adsorbent prevents harmful gases such as cigarette smoke and CO2 from being introduced via the skimmer.
Capacity1000 ml of Skim Breeze per 500 liters (132 US gal) of aquarium volume will last about 4-6 weeks.Skim Breeze granulate must be replaced when granulate turns completely violet.A refolding of the used material does not mean it can be used again.
Dosing instructionsPlace Skim Breeze granules into a dry filter and connect the filter to skimmer air inlet.
Safety advice: Keep out of the reach of children. Read the identification label before use. May irritate the respiratory tract. May be corrosive to metals. Causes severe skin burns and severe eye damage. Wear protective gloves/protective clothing/eye protection/face protection.
IF CONTACT WITH EYES: Rinse gently with water for several minutes. Remove any contact lenses if possible. Continue rinsing. IF INGESTED: Rinse mouth. DO NOT induce vomiting. IF EXPOSED or if affected, call TOXIC INFORMATION CENTRE/doctor/.../ immediately. Disposal recommen- dation: The saturated granules can be disposed of with household waste. More information is available at www.faunamarin.de
IngredientsCalcium hydroxide (EC 215-137-3), sodium hydroxide (EC 215-283-8), zeolites (EC 215-283-8)
Proper disposalExhausted granules can be disposed via household waste.
Product Description
The Tunze Macro Algae 3181 Reactor is designed for aquariums from 100 to 600 litres.
When running the 3181 Reactor the ideal flow rate is 500 to 1,200 l/h
The 3181 is economical on power as it only has a energy consumption with pump of approx. 20 W
It is ideally suited in sumps with a measurement (L x W x H): 233 x 195 x 422 mm
The Comline Pump 2500 electronic and Turbelle Controller basic 7090.200 is included in the box making the 3181 an all in one solution.
The TUNZE 3181 algae reactor will:
Create growth for cultivation of algae in seawater
Biological detoxification of ecosystems by algae / plants
Reduction of nitrate and phosphate content
Filtration of the aquarium water
Production of food supplement for fish
Zooplankton refuge, serving as food for corals and fish
Enrichment of the water with oxygen
Provide natural filtration / export of nutrients
The Macro Algae Reactor MAR 3181 is specially constructed to cultivate algae in seawater and plants in freshwater.
Chaetomorpha "Spaghetti Algae" is cultured by many marine aquarists to eliminate nitrates and phosphates from the aquatic biotope.
It is absolutely sufficient to harvest a handful of algae from time to time to maintain the biological balance in an aquarium – an economical and easy alternative to many chemicals or resins.
Naja Grass, Najas guadalupensis, can be grown to purify freshwater systems, such as cichlid biotopes.
TUNZE MAR 3181 can be placed in any filter basin or next to the aquarium without external filter technology.
The water circulation in the reactor ensures the rotation of the algae culture and thus reduces the number of light sources accompanied by strong plant growth.
However, additional light sources can be added to the device as needed.
Product Description
Two Little Fishies PhosBan Reactor 150. Largest adsorption capacity of any phosphate filtering media. Ferric oxide hydroxide-based granules also adsorb organics and other pollutants.Two Little Fishies PhosBan Reactor 150 w/one 1/2" ball valve & one ratchet clamp
The PhosBan Reactor 150 is designed with the upflow principle to achieve the most efficient use of PhosBan or other chemical filter media.
By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media, and prevents channeling.
It can be mounted hanging on the back of the aquarium or below the aquarium.
Hose barb connections are for 1/2 inch i.d. tubing. Includes 1/2 inch barbed ball valve for flow control, and hose clamps.
Use with any pump having a capacity between 375 and 1000 lph, but regulate the flow rate to the recommended 75 to 115 litres per hour with the included ball valve.
THIS PRODUCT IS SPECIAL ORDER ITEMS
Product Description
The Seatorch Calcium reactor SM80 is designed for aquariums from 1000 to 1300 litres, can be operated internally or externally for any tanks.
Dimensions: L 350 mm x W 260 mm x H 565 mm.
With a capacity of 8 litres filling quantity of broken coral.
Seatorch calcium reactor is made of high quality PVC not acrylic.
Come with dual mode - energy saving mode or silence mode.
This powerful reactor has a unique features with our own design gas-water instantaneous mixer, it can maximum gas water mixing rate by 50%.
With its spiral mixing channel, double sealed sound insulation design, plus all the gas coming from the second chamber, separated to the pump, which make this reactor extremely quite.
Scope of delivery: Calcium reactor – Aquabee UP 2000 (15 watts) – various hoses – spare screws
THIS PRODUCT IS SPECIAL ORDER ITEMS
Product Description
The Seatorch Calcium reactor SM60 is designed for aquariums from 100 to 1000 litres, can be operated internally or externally for any tanks.
Dimensions: L 320 mm x W 258 mm x H 565 mm.
With a capacity of 6 litres filling quantity of broken coral.
Seatorch calcium reactor is made of high quality PVC not acrylic.
Come with dual mode - energy saving mode or silence mode.
This powerful reactor has a unique features with our own design gas-water instantaneous mixer, it can maximum gas water mixing rate by 50%.
With its spiral mixing channel, double sealed sound insulation design, plus all the gas coming from the second chamber, separated to the pump, which make this reactor extremely quite.
Scope of delivery:
Calcium reactor – Aquabee UP 2000 (15 watts) – various hoses – spare screws
THIS PRODUCT IS SPECIAL ORDER ITEMS
Product Description
The Seatorch Calcium reactor SM120 is designed for aquariums from 1200 to 2000 litres, can be operated internally or externally for any tanks.
Dimensions: L 389 mm x W 263 mm x H 565 mm.
With a capacity of 12 litres filling quantity of broken coral.
Seatorch calcium reactor is made of high quality PVC not acrylic.
Come with dual mode - energy saving mode or silence mode.
This powerful reactor has a unique features with our own design gas-water instantaneous mixer, it can maximum gas water mixing rate by 50%.
With its spiral mixing channel, double sealed sound insulation design, plus all the gas coming from the second chamber, separated to the pump, which make this reactor extremely quite.
Scope of delivery: Calcium reactor – Aquabee UP 3000 (40 watts) – various hoses – spare screws
This calcium reactor is designed by aquarists for aquarists!
