Product Description
These series are made of high quality brass and aluminium, each vent hole is equipped with a trim valve, it can adjust the gas output accurately.
Product Description
The Chihiros Poppy Type Glass Outflows are made of high quality glass.
The Poppy Type Glass Outflow are designed to transport the filtered water gently back to the aquarium.
The slightly upwards tilted head provides a better water circulation right beneath the surface which effecively raises the oxygen level of your aquarium. A positive side effect is the reduction of the surface film.
This glass outflow will be delivered with two suction cups.
Features
Made of high-quality glass
Transparent suction cups included
Fits hose 16/22 mm (17 mm)
Product Description
The Chihiros U Type Glass Inflows are made of high quality glass.Glass Inflows are designed to transport the water from the aquarium to the external canister filter. Clear water combined with glass is nearly invisible to bias the focus onto your aquascape and not the equipment.A filter guard can easily be attached to secure the filtration system regarding shrimp and small fish.This glass outflow will be delivered with two suction cups.
Medium -
Fit for hose: 12/16mm
Height: 258mm
Large -
Fit for hose: 16/22mm
Height: 300mm
Product Description
DicI CO2 Bubble Counter DC06-03
With lock-nut design system, the bubble counter can effectively lock the C02 hosing and prevent the loose. Clearly shows the output of C02. (With function of non-return)
Bubble counters with built in Check Valve are essential for determining the amount of CO2 that we inject into planted Aquariums.
This device mounts directly onto to a CO2 Regulators needle valve. Remove an end cap and fill 3/4 with water. When installed it accurately measures the drop rate (drops p/sec). Has a built in Check Valve to prevent back flow into the regulator.
This unit comes with the little o-ring required for the needle valve port just in case your needle valve doesn't have one. All CO2PRO regulators / Smart Alloy Splitters come equipped with o-rings preinstalled for your convenience.
Product Description
- Small and Sleek, allowing less equipment to be placed inside of the tank.
- Larger diffusion area compared with traditional diffuses.- Replaceable ceramic membrane- Two size: 12/16mm and 16/22mm fiter tubing.
Description
The Qanvee CO2 Atomizer is an inline aquarium CO2 diffuser that is designed to be installed outside of a planted tank rather than being placed inside. It allows less equipment to be placed into your aquarium providing a more visually appealing setup without sacrificing the needs of your aquatic plants. As the CO2 bubbles pass through this diffuser, they are diffused into tiny CO2 bubbles that can be efficiently absorbed by plants with less waste, promoting their photosynthesis.Setup is very easy by following the steps in the image. Remember to test it if it leaks before apply onto your tank. Also, the Qanvee CO2 atomizer comes completely apart easily for routine maintenance and cleaning. Replacement ceramic tubes are available as well to ensure this piece of essential planted aquarium equipment can be used for years to come.
Move away from ugly plastic inlets and outlets and create an elegant interior instantly. This also has the added benefit of manually removing oils and debris from your surface, resulting in an ultra clear aquarium from all angles.
Two sizes available:
12/16mm hose
16/22mm hose
Most tropical waters have a strong, but an even flow. In well filtered fish tanks the strong jet of the external filter might stress the fish and can cause CO2 distribution problems by the water friction making the dissolved gas evaporate from the water. The shape of the Outflow is designed to disperse the jet-type flow to an even and less invasive current in the aquarium.
This set include 1 x Lily Pipe inflow (17mm), 1 x Surface skimmer (17mm)
Most tropical waters have a strong, but an even flow. In well filtered fish tanks the strong jet of the external filter might stress the fish and can cause CO2 distribution problems by the water friction making the dissolved gas evaporate from the water. The shape of the Outflow is designed to disperse the jet-type flow to an even and less invasive current in the aquarium.
This set include 1 x Lily Pipe inflow (17mm), 1 x Surface skimmer (17mm)
Most tropical waters have a strong, but an even flow. In well filtered fish tanks the strong jet of the external filter might stress the fish and can cause CO2 distribution problems by the water friction making the dissolved gas evaporate from the water. The shape of the Outflow is designed to disperse the jet-type flow to an even and less invasive current in the aquarium.
This set include 1 x Poppy Shape Pipe inflow (17mm), 1 x U shape outflow (17mm)
Most tropical waters have a strong, but an even flow. In well filtered fish tanks the strong jet of the external filter might stress the fish and can cause CO2 distribution problems by the water friction making the dissolved gas evaporate from the water. The shape of the Outflow is designed to disperse the jet-type flow to an even and less invasive current in the aquarium.
This set include 1 x Lily Pipe inflow (17mm), 1 x U shape outflow (17mm)
Most tropical waters have a strong, but an even flow. In well filtered fish tanks the strong jet of the external filter might stress the fish and can cause CO2 distribution problems by the water friction making the dissolved gas evaporate from the water. The shape of the Outflow is designed to disperse the jet-type flow to an even and less invasive current in the aquarium.
Glass inflow give the aquarium a clean look.
The shape of the U type Inflow is designed to provide a steady and reliable suction while not obstructing the filter performance.
Two sizes available:
M size fits 12/16mm hose, length 258mm.
L size fits 16/22mm hose, length 300mm.
