Product Description
The pharmaceutical grade sea salt especially for modern reef aquaria
Tropic Marin PRO-REEF Sea Salt has been designed to meet the special requirements of reef aquariums with optimized concentrations of calcium and magnesium, which promote the growth of corals. The lower buffering and the correct pH value serve to stabilize the natural water values, and particularly, the hardness of carbonates, even with the use of calcium reactors. Natural and stable conditions for delicate marine life are achieved only by accurately balancing all influencing factors.
Tropic Marin PRO-REEF is thus the ideal foundation for the care and growth of fish, corals and other aquatic invertebrates in modern reef aquariums. Use seawater prepared with Tropic Marin PRO-REEF for regular water changes in your seawater aquarium, to start a new aquarium and to re-equilibrate the pH of a tank.
Benefits:
Optimizes calcium- and magnesium concentrations as well as alkalinity and pH.
Designed to meet the special requirements of modern reef aquaria with higher calcium requirements.
Especially designed for use with calcium reactors or mineral additives.
To maintain the alkalinity in a 7-8° dKH range.
Manufactured from pure, pharmaceutical grade salts.
Contains all major- and minor elements in the exact proportions found in tropical sea water.
The 70 trace elements are completely soluble due to the use of the mixed-crystal method.
Compliance with the most stringent quality control measures for the production of pharmaceuticals ensures nature-identical seawater.
Free from nitrates, phosphates and other unwanted chemicals.
How to use:
To achieve a salinity level of 32-35 ‰ (psu), dissolve 35 ml of Tropic Marin® PRO-REEF per liter or approximately ½ cup of Tropic Marin® PRO-REEF per US gallon water. Dissolve almost all of the salt in a clean container already filled with the full volume of RO/DI water at a temperature of 73-77°F / 23-25°C while circulating/stirring the water. Do not concentrate the mixture by adding the full amount of salt to a smaller amount of water.
Note: Always add the salt to the water, never the water to the salt. Making a concentrated mixture will cause a calcium carbonate precipitate to form.
When you have added ALMOST all of the salt and the mixture is fully dissolved and clear, start measuring the specific gravity with a hydrometer or similar instrument. Keep adding small amounts of salt until the specific gravity is the value you desire. The specific gravity of the sea salt solution should range from 1.025 to 1.027 (at 73-77°F / 23-25°C) and the pH-value should be in the range of 8.0 – 8.4. If all parameters are correct, the salt water is ready to use.
After setting up a new aquarium it takes a few weeks of water being circulated and correct lighting conditions to achieve the biologically stable environment required for the care and breeding of delicate marine organisms.
A weekly, partial water change, replacing 10 % of the total water volume with Tropic Marin® PRO-REEF, will help to maintain the water quality that your livestock needs for good health.
Parameters: approx. 7° KH, calcium approx. 440 ppm, magnesium approx. 1350 ppm
Application: For reef tanks with higher calcium requirements. To maintain the alkalinity in a 7-8° dKH range; particularly suitable when using a calcium reactor.
Use the new dosing calculator for an easy determination of the required amount of salt for your aquarium.
4kg Box
THIS PRODUCT IS PICK UP ONLY.
Product Description
The pharmaceutical grade sea salt especially for modern reef aquaria
Tropic Marin PRO-REEF Sea Salt has been designed to meet the special requirements of reef aquariums with optimized concentrations of calcium and magnesium, which promote the growth of corals. The lower buffering and the correct pH value serve to stabilize the natural water values, and particularly, the hardness of carbonates, even with the use of calcium reactors. Natural and stable conditions for delicate marine life are achieved only by accurately balancing all influencing factors.
Tropic Marin PRO-REEF is thus the ideal foundation for the care and growth of fish, corals and other aquatic invertebrates in modern reef aquariums. Use seawater prepared with Tropic Marin PRO-REEF for regular water changes in your seawater aquarium, to start a new aquarium and to re-equilibrate the pH of a tank.
Benefits:
Optimizes calcium- and magnesium concentrations as well as alkalinity and pH.
Designed to meet the special requirements of modern reef aquaria with higher calcium requirements.
Especially designed for use with calcium reactors or mineral additives.
To maintain the alkalinity in a 7-8° dKH range.
Manufactured from pure, pharmaceutical grade salts.
Contains all major- and minor elements in the exact proportions found in tropical sea water.
The 70 trace elements are completely soluble due to the use of the mixed-crystal method.
Compliance with the most stringent quality control measures for the production of pharmaceuticals ensures nature-identical seawater.
Free from nitrates, phosphates and other unwanted chemicals.
How to use:
To achieve a salinity level of 32-35 ‰ (psu), dissolve 35 ml of Tropic Marin® PRO-REEF per liter or approximately ½ cup of Tropic Marin® PRO-REEF per US gallon water. Dissolve almost all of the salt in a clean container already filled with the full volume of RO/DI water at a temperature of 73-77°F / 23-25°C while circulating/stirring the water. Do not concentrate the mixture by adding the full amount of salt to a smaller amount of water.
Note: Always add the salt to the water, never the water to the salt. Making a concentrated mixture will cause a calcium carbonate precipitate to form.
When you have added ALMOST all of the salt and the mixture is fully dissolved and clear, start measuring the specific gravity with a hydrometer or similar instrument. Keep adding small amounts of salt until the specific gravity is the value you desire. The specific gravity of the sea salt solution should range from 1.025 to 1.027 (at 73-77°F / 23-25°C) and the pH-value should be in the range of 8.0 – 8.4. If all parameters are correct, the salt water is ready to use.
After setting up a new aquarium it takes a few weeks of water being circulated and correct lighting conditions to achieve the biologically stable environment required for the care and breeding of delicate marine organisms.
A weekly, partial water change, replacing 10 % of the total water volume with Tropic Marin® PRO-REEF, will help to maintain the water quality that your livestock needs for good health.
Parameters: approx. 7° KH, calcium approx. 440 ppm, magnesium approx. 1350 ppm
Application: For reef tanks with higher calcium requirements. To maintain the alkalinity in a 7-8° dKH range; particularly suitable when using a calcium reactor.
Use the new dosing calculator for an easy determination of the required amount of salt for your aquarium.
25kg
Product Description
Synthetic marine salt for aquariums with fish and less delicate corals and invertebrates. When setting up new aquariums it is recommended that the first animals are placed no sooner than 10-14 days after filling the aquarium. After dissolving the salt, freshly prepared marine water can be user immediately.
Instructions for use:Dissolve the salt in previously prepared demineralised water. Water temperature should be about 24°C (75°F). For salinity of 30 ppt dissolve about 3.25 kg (7.16 lbs) of salt in 100 litres (27 US gal) of water. Stir the solution vigorously for about 15 min. When the salt is fully dissolved and the solution clear the saline water is ready to use. Keep the salt in a dry and dark place. Once Dissolved, use the salt within 5 days. Keep out of reach of children! Product for aquarium use only! Reef Salt is not suitable for human consumption! Safety data sheet available on request.
Parameters of a salt are presented below:
24°C / 75.2°F
Mg – 1200-1300 mg/l
Ca – 360-400 mg/l
K – 300-350 mg/l
dKH – 8,0-9,0
pH – 8,0-8,2
Aquaforest products are manufactured in the EU under strict laboratory supervision to meet the highest quality standards. Each product is prepared from carefully selected raw components in quantities proven to yield consistent compositi on.
How is our Marine Salt product range tested?We mix our Marine Salt in 1 metric tonne (2204lb) batches, and 3 separate samples per batch are collected during the production stage for testi ng. Each of these samples is dissolved in 15 litres (4US gal) of RO water. Our experienced team of professionals perform ICP-OES analysis to verify that the chemical compositi on is within consistent range, and to rule out the presence of unwanted contaminants at the same ti me. Note: Even though our salt is thoroughly mixed, not every bucket/box will be identi cal. The parameters can vary slightly between containers and around a 2-3% variation is acceptable. This fl uctuati on is a result of both physical properties of the mix and the limitati ons of the processing techniques available. These variations are still smaller than the typical margin for error for popular hobbyist test kits.
Efficency of Reef Salt depending on the packaging:
Recommended salinity for different aquarium types:
Macro and micro elements in the water have different levels depending on the salinity:
THIS PRODUCT IS PICK UP ONLY.
Product Description
Red Sea Salt
Premium grade, moderate Alkalinity
Red Sea Salt contains moderately elevated and balanced levels of the foundation elements(Calcium, Magnesium, Bicarbonates) necessary for sustainable coral growth.
When combined with our reef care recipes, it will maximize pigment saturation to bring out your coral’s most vivid colors, while encouraging growth up to twice the natural rate. Red Sea Salt’s Alkalinity of 8dKH makes it ideal for all reef aquarium types, and especially SPS dominated tanks.
Product Description
Red Sea Salt
Premium grade, moderate Alkalinity
Red Sea Salt contains moderately elevated and balanced levels of the foundation elements(Calcium, Magnesium, Bicarbonates) necessary for sustainable coral growth.
When combined with our reef care recipes, it will maximize pigment saturation to bring out your coral’s most vivid colors, while encouraging growth up to twice the natural rate. Red Sea Salt’s Alkalinity of 8dKH makes it ideal for all reef aquarium types, and especially SPS dominated tanks.
THIS PRODUCT IS PICK UP ONLY.
Product Description
Coral Pro Salt
Premium grade, high Alkalinity
Coral Pro contains elevated and balanced levels of the foundation elements (Calcium, Magnesium, Bicarbonates) necessary for sustainable, accelerated coral growth.
If your goal is to maximize coral growth, then Coral Pro combined with our reef care recipes will enhance growth up to four times their natural rate. Coral Pro’s Alkalinity of 12 dKH makes it ideal for mixed reefs and SPS frag tanks.
Product Description
Synthetic marine salt for aquariums with fish and less delicate corals and invertebrates. When setting up new aquariums it is recommended that the first animals are placed no sooner than 10-14 days after filling the aquarium. After dissolving the salt, freshly prepared marine water can be user immediately.
Instructions for use:Dissolve the salt in previously prepared demineralised water. Water temperature should be about 24°C (75°F). For salinity of 30 ppt dissolve about 3.25 kg (7.16 lbs) of salt in 100 litres (27 US gal) of water. Stir the solution vigorously for about 15 min. When the salt is fully dissolved and the solution clear the saline water is ready to use. Keep the salt in a dry and dark place. Once Dissolved, use the salt within 5 days. Keep out of reach of children! Product for aquarium use only! Reef Salt is not suitable for human consumption! Safety data sheet available on request.
Parameters of a salt are presented below:
24°C / 75.2°F
Mg – 1200-1300 mg/l
Ca – 360-400 mg/l
K – 300-350 mg/l
dKH – 8,0-9,0
pH – 8,0-8,2
Aquaforest products are manufactured in the EU under strict laboratory supervision to meet the highest quality standards. Each product is prepared from carefully selected raw components in quantities proven to yield consistent compositi on.
How is our Marine Salt product range tested?We mix our Marine Salt in 1 metric tonne (2204lb) batches, and 3 separate samples per batch are collected during the production stage for testi ng. Each of these samples is dissolved in 15 litres (4US gal) of RO water. Our experienced team of professionals perform ICP-OES analysis to verify that the chemical compositi on is within consistent range, and to rule out the presence of unwanted contaminants at the same ti me. Note: Even though our salt is thoroughly mixed, not every bucket/box will be identi cal. The parameters can vary slightly between containers and around a 2-3% variation is acceptable. This fl uctuati on is a result of both physical properties of the mix and the limitati ons of the processing techniques available. These variations are still smaller than the typical margin for error for popular hobbyist test kits.
Efficency of Reef Salt depending on the packaging:
Recommended salinity for different aquarium types:
Macro and micro elements in the water have different levels depending on the salinity:
Product Description
Coral Pro Salt
Premium grade, high Alkalinity
Coral Pro contains elevated and balanced levels of the foundation elements (Calcium, Magnesium, Bicarbonates) necessary for sustainable, accelerated coral growth.
If your goal is to maximize coral growth, then Coral Pro combined with our reef care recipeswill enhance growth up to four times their natural rate. Coral Pro’s Alkalinity of 12 dKH makes it ideal for mixed reefs and SPS frag tanks.
Product Description
Biotope African Cichlid Conditioning Salts is a minerals based water conditioner specifically blended for African Cichlids. Suitable for Cichlids from lakes Malawi, Tanganyika and Victoria.
Contains magnesium (2 forms), calcium (2 forms), potassium, sodium, sulphate, chloride, carbonates and bi-carbonates
Phosphate free
Made in Australia
Instructions: To increase the GH to 18 degrees (315mg/L) add 5g (1 teaspoon) to 10 litres of water, only treat the newly added water. For harder water adjust the dose rate as required.
Product Description
Pond Salt™ is a chemically sound blend of salts designed to replicate the native ionic environment of goldfish and koi without adversely impacting on pond plants when used at the recommended dosage. It can also be useful to temporarily reduce nitrite toxicity in an emergency situation. It does not impact pH. For pH control, use Pond Acid Buffer™ or Pond pH Buffer™.
Pond Salt™ is more than just a simple sodium chloride product. Other salts can burn leaves and roots in a planted pond. However, Pond Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Pond Salt™ is a safe and effective alternative to the sodium chloride based pond salts so prevalent.
THIS PRODUCT IS PICK UP ONLY.
Product Description
Pure, pharmaceutical grade sea salt containing all trace elements found in natural seawater.
From (osmosis-) water to seawater. Tropic Marin® Sea Salt CLASSIC is made up of all of the macro elements and trace elements in a natural balance, contained within the ocean, and it is free from artificial additives, nitrates and phosphates. The trace elements remain completely soluble in the mixed crystals. Contains appropriate amounts of bicarbonates which stabilize the aquariums alkalinity and pH.
Tropic Marin® Sea Salt CLASSIC is an ideal foundation for the care and growth of all marine organisms in an aquarium. Use seawater prepared with Tropic Marin® Sea Salt CLASSIC for regular water changes in your seawater aquarium, to start a new aquarium and to re-equilibrate the pH of a tank.
Benefits:
Provides the ideal environment for the care of all marine organisms in the aquarium, including even the most sensitive species.
Contains all major- and minor elements in the exact proportions found in tropical sea water.
To maintain the alkalinity in a 9-10° dKH range.
Stabilizes the pH value.
High solubility in water.
Free from nitrates, phosphates and other unwanted chemicals.
Manufactured from pure, pharmaceutical grade salts, which has the most stringent quality control measures for the production of pharmaceuticals.
Used successfully for many years in zoos, public aquariums and scientific institutions around the world.
How to use:
To achieve a salinity level of 32-35 ‰ (psu), dissolve 35 ml of Tropic Marin® Sea Salt CLASSIC per liter or approximately ½ cup of Tropic Marin® Sea Salt CLASSIC per US gallon water. Dissolve almost all of the salt in a clean container already filled with the full volume of RO/DI water at a temperature of 73-77 °F / 23-25 °C while circulating/stirring the water. Do not concentrate the mixture by adding the full amount of salt to a smaller amount of water.
Note: Always add the salt to the water, never the water to the salt. Making a concentrated mixture will cause a calcium carbonate precipitate to form.
When you have added ALMOST all of the salt and the mixture is fully dissolved and clear, start measuring the specific gravity with a hydrometer or similar instrument. Keep adding small amounts of salt until the specific gravity is the value you desire. The specific gravity of the sea salt solution should range from 1.025 to 1.027 (at 73-77 °F / 23-25 °C) and the pH -value should be in the range of 8.0 – 8.4. If all parameters are correct, the salt water is ready to use.
After setting up a new aquarium it takes a few weeks of water being circulated and correct lighting conditions to achieve the biologically stable environment required for the care and breeding of delicate marine organisms.
A weekly, partial water change, replacing 10 % of the total water volume with Tropic Marin® Sea Salt CLASSIC , will help to maintain the water quality that your livestock needs for good health.
Parameters: approx. 9-10° KH, calcium approx. 380 ppm, magnesium approx. 1260 ppm
Application: For fish only tanks and reef tanks with soft corals with no special requirements. To maintain the alkalinity in a 9-10 °dH range.
10Kg
THIS PRODUCT IS PICK UP ONLY.
Product Description
Pure, pharmaceutical grade sea salt containing all trace elements found in natural seawater.
From (osmosis-) water to seawater. Tropic Marin® Sea Salt CLASSIC is made up of all of the macro elements and trace elements in a natural balance, contained within the ocean, and it is free from artificial additives, nitrates and phosphates. The trace elements remain completely soluble in the mixed crystals. Contains appropriate amounts of bicarbonates which stabilize the aquariums alkalinity and pH.
Tropic Marin® Sea Salt CLASSIC is an ideal foundation for the care and growth of all marine organisms in an aquarium. Use seawater prepared with Tropic Marin® Sea Salt CLASSIC for regular water changes in your seawater aquarium, to start a new aquarium and to re-equilibrate the pH of a tank.
Benefits:
Provides the ideal environment for the care of all marine organisms in the aquarium, including even the most sensitive species.
Contains all major- and minor elements in the exact proportions found in tropical sea water.
To maintain the alkalinity in a 9-10° dKH range.
Stabilizes the pH value.
High solubility in water.
Free from nitrates, phosphates and other unwanted chemicals.
Manufactured from pure, pharmaceutical grade salts, which has the most stringent quality control measures for the production of pharmaceuticals.
Used successfully for many years in zoos, public aquariums and scientific institutions around the world.
How to use:
To achieve a salinity level of 32-35 ‰ (psu), dissolve 35 ml of Tropic Marin® Sea Salt CLASSIC per liter or approximately ½ cup of Tropic Marin® Sea Salt CLASSIC per US gallon water. Dissolve almost all of the salt in a clean container already filled with the full volume of RO/DI water at a temperature of 73-77 °F / 23-25 °C while circulating/stirring the water. Do not concentrate the mixture by adding the full amount of salt to a smaller amount of water.
Note: Always add the salt to the water, never the water to the salt. Making a concentrated mixture will cause a calcium carbonate precipitate to form.
When you have added ALMOST all of the salt and the mixture is fully dissolved and clear, start measuring the specific gravity with a hydrometer or similar instrument. Keep adding small amounts of salt until the specific gravity is the value you desire. The specific gravity of the sea salt solution should range from 1.025 to 1.027 (at 73-77 °F / 23-25 °C) and the pH -value should be in the range of 8.0 – 8.4. If all parameters are correct, the salt water is ready to use.
After setting up a new aquarium it takes a few weeks of water being circulated and correct lighting conditions to achieve the biologically stable environment required for the care and breeding of delicate marine organisms.
A weekly, partial water change, replacing 10 % of the total water volume with Tropic Marin® Sea Salt CLASSIC , will help to maintain the water quality that your livestock needs for good health.
Parameters: approx. 9-10° KH, calcium approx. 380 ppm, magnesium approx. 1260 ppm
Application: For fish only tanks and reef tanks with soft corals with no special requirements. To maintain the alkalinity in a 9-10 °dH range.
25Kg