Product Description Tidal™ Power Filters are designed from the ground up to provide your aquarium with high-quality, comprehensive filtration. They are easy to use and adaptable to a variety of aquarium conditions. With a host of features including a self-priming pump, dual water intake with surface skimmer, adjustable flow, maintenance monitor, self-cleaning impeller, and a filter basket that holds any kind of filtration media - and more of it - Tidal™ Power Filters are designed to deliver the highest water quality possible with maximum versatility and ease of use. They are suited to a wide variety of aquarium setups from saltwater to freshwater, ranging in size from 55 gallons to 110 gallons. All Tidal™ Filters have a 3 year warranty that can be extended to 5 years by registering your filter. Innovative Design Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration. The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow. The pump is also insulated and silent, making it excellent for office or dining room aquariums, and has extremely low power consumption for the amount of output – the large Tidal 110 filter uses only 12 watts. Over time, filtration media can become clogged with detritus and prevent water from flowing through. When this happens in the Tidal Filter, water is redirected around the filter and back into the aquarium through an outlet to the side. When this happens, the redirected water pushes up the blue maintenance monitor on the top of the filter, letting the aquarium keeper know that the filter media needs to be cleaned out. The basket is designed with raised slots which catch detritus rather than allowing it to fall through back into the filter when flow is stopped. A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium. Compare Models Tidal™35 Aquarium Size Up to 35 US gallons (130 Liters) Flow Rate 130 US GPH (500 L/H) Filter Volume0.2 US gallons (0.7 Liters) Tidal™55 Aquarium Size Up to 55 US gallons (200 Liters) Flow Rate 250 US GPH (1000 L/H) Filter Volume0.32 US gallons (1.2 Liters) Tidal™75 Aquarium Size Up to 75 US gallons (300 Liters) Flow Rate 350 US GPH (1500 L/H) Filter Volume0.50 US gallons (1.9 Liters) Tidal™110 Aquarium Size Up to 110 US gallons (400 Liters) Flow Rate 450 US GPH (2000 L/H) Filter Volume0.85 US gallons (3.2 Liters) Easy to Use Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter. This also means that filter will restart itself with no trouble after a power outage or after maintenance. The self-cleaning, non-corrosive impeller suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments. The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice (No cartridges). All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.

Read more less

Product Description Stability® will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management. The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability® is not limited this way. The necessary conditions for the growth of Stability's™ bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability™ simply becomes more effective. Directions Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture. Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix™. For emergency ammonia control, use Seachem AmGuard™.

Read more less

Product Description Seachem Matrix Carbon Pack to suit the Tidal Filters. High Capacity filtration delivering crystal clear water and removing odours. MatrixCarbon is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of macroporous binding sites. MatrixCarbon has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0. While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon has the lowest detectable leachable phosphate content of all major carbon brands tested. MatrixCarbon outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use. While carbon is generally considered to be a chemical filter, that is not precisely true. It is in fact a mechanical filter as well, but it is only capable of mechanically filtering objects of molecular size. It functions through extremely small cracks and crevices, called macropores and micropores. Microporous carbons remove primarily metals and smaller ions (like trace minerals) and are best suited to air filtration, while macroporous carbons remove primarily larger organic molecules (like nitrogenous waste) and are best suited to water filtration. The ingredients from which a carbon is manufactured determine whether it will be macro- or microporous. Carbons made from coconut shell and other organic products form microporous carbons, while carbons made from bituminous coal form macroporous carbons. MatrixCarbon is a bituminous coal-based, macroporous carbon. It is the only spherical carbon on the market, allowing for maximum water flow. It is sized to allow full penetration by water, but not small enough to escape filter bags. All carbons contain phosphate. However, that phosphate DOES NOT come from washing the carbon with phosphoric acid. Most carbons are washed with sulfuric acid. The phosphate is contained in the ash from the carbon source. The main purpose of acid-washing is to remove ash. Because of MatrixCarbon’s hydrodynamic properties, more ash is washed from our carbon than any other. Therefore, it has the lowest leachable phosphate on the market.

Read more less

Product Description PhosGuard™ rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuard™ is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water. It is not recommended for phosphate buffered freshwater (PhosGuard™ would remove the buffer until saturated). PhosGuard™ is highly porous and bead-shaped to promote easy water flow through and around it, thereby increasing both its efficiency and capacity. May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™ Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.

Read more less

Product Description GarlicGuard™ is an all natural garlic scented odor and flavor enhancer for freshwater and saltwater fish. Our research has shown that many fish are attracted to natural odors, such as garlic. Simply mix GarlicGuard™ with any food item, such as Seachem’s NutriDiet® Flakes, to attract the interest of finicky eaters, e.g. discus and marine angelfish. GarlicGuard is safe for reef and planted aquariums. Shake well before use. Soak food in GarlicGuard™ before feeding. Safe for use with medicated foods (to attract the interest of finicky eaters to the medicated food). For example, for enhanced effectiveness against Ich and other parasites use Seachem’s Focus™ and MetroPlex™ as follows: Add 1 measure of MetroPlex™ to 1 measure of Focus™ per tablespoon of food. Completely soak this food mix in GarlicGuard™, refrigerate, and feed once or twice daily for 1–2 weeks.

Read more less

Product Description The Alert Combo™ pack combines Ammonia Alert® (1 card) and pH Alert® (1 card). Ammonia Alert® and pH Alert® are almost half the size of competing products. At 1.5" x 2.5", they are small, clear, and unobtrusive, so they won't detract from the view of your aquarium. Simply place Ammonia Alert® and pH Alert® visibly anywhere in the aquarium or filter. It’s that easy. No chemicals or test procedures are required. Ammonia Alert Ammonia Alert's® sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. It detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to go from TOXIC to SAFE on removal of ammonia. Marine or freshwater use. pH Alert pH Alert® is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly from yellow to orange to red alerting you to shifts in pH levels between 5.4 and 8.0. When first put in service, pH Alert® response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes. Freshwater use only.

Read more less

Product Description Purigen® is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen® darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen® is designed for both marine and freshwater use. Rinse before use. Use in a fine mesh (180 micron or less) filter bag such as Seachem’s The Bag™. For best results, Purigen® should be placed so as to maximize the flow of water through it. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black. Regeneration Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Prime®, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer®, Neutral Regulator®). Original color and full activity should now be restored and Purigen® is ready for reuse. Caution: some slime coat products may permanently foul Purigen® and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Read more less

Product Description The Seachem Algae Scraper is designed with versatility in mind. With three retractable blades: metal, plastic, and soft pad, it is suited for both glass and acrylic aquariums. It is lightweight and features an ergonomic handle making it comfortable to hold in multiple positions. In addition, it floats for easy retrieval. Finally, its white color makes it easy to see the algae you want to remove and when you’ve effectively removed it. Ergonomic handle allows for easy use in multiple positions Retractable blade housing safely hides blade while not is use. White design contrasts with algae so you can see what you are removing Floats for easy retrieval Handle hole for hanging storage Sizes: 6 inches (15 cm), 12 inches (31 cm), 18 inches (46 cm)

Read more less

Product Description The Seachem Algae Pads are non-scratch algae pads for glass & acrylic. The melamine foam uses micro abrasive technology to easily remove algae from the sides of your aquarium. They are particularly effective at removing algae from scratches. They are chemically inert and do not use soaps or detergents. Their white color contrasts against dark algae making it easier to see when areas are fully clean. More on Melamine Melamine foam is incredibly effective abrasive cleaner. It has a microstructure as hard as glass, but because of its open-cell structure it remains flexible. It performs on stains a lot like extremely fine sandpaper. In the aquarium, it easily removes algae by scraping with its extremely hard microscopic filaments. Sizes: 4.5" x 1" x 2.5" (3 Pack)

Read more less

Product Description  Nearly all pet aquatics companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime®. Prime® is the complete and concentrated conditioner for both fresh and saltwater. Prime® removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Prime® will not over-activate skimmers. Prime® is up to 5x more concentrated than competing products and is the second most concentrated dechlorinator on the market only after our own aquavitro® alpha™. Prime® may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Prime®. Why It's Different  Nearly all companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime. Prime is the second most concentrated dechlorinator on the market after aquavitro alpha. A single 100 mL bottle will treat 1000 US gallons of tap water. Prime will remove both chlorine and chloramines from municipal water supplies. Prime also contains a binder which renders ammonia, nitrite, and nitrate non-toxic. It is very important to understand how those two functions work together. All dechlorinators operate through a chemical process known as reduction. In this process, toxic dissolved chlorine gas (Cl2) is converted into non-toxic chloride ions (Cl-). The reduction process also breaks the bonds between chlorine and nitrogen atoms in the chloramine molecule (NH2Cl), freeing the chlorine atoms and replacing them with hydrogen (H) to create ammonia (NH3). Typically, dechlorinators stop there, leaving an aquarium full of toxic ammonia! Seachem takes the necessary next step by including an ammonia binder to detoxify the ammonia produced in the reduction process. Be very careful when purchasing water conditioners. If your municipality includes chloramines in the water supplies, a standard sodium thiosulfate dechlorinator is not enough. Prime promotes the natural production and restoration of the slime coat rather than relying on artificial or non-native slime compounds. A further bonus for the reef hobbyist—Prime will not overactivate protein skimmers. Directions  Use 1 capful (5 mL) for each 200 L (50 gallons*) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Read more less