PRE-ORDER ITEM
Product Description
Meet the new 4-part Complete Reef Care, providing hobbyists with more convenience at no extra cost, and ensuring optimal coral growth and vivid colors with only one test per week!
Our long-term research has revealed that in most reef systems without refugium, the Major, Minor, and Trace elements and even the Alkalinity components are used up in a relatively fixed ratio.Since Calcium is the key indicator of coral growth, the 4-part program revolves around a single weekly measurement of Calcium, which determines the dosages of all 4 parts. The new Complete Reef Care is available in 3 sizes, to fit all system sizes. It is formulated so all 4 parts are used up at the same time, and if supplemented via Red Sea’s ReefDose, the hobbyist needs only to set their Calcium dose and ReefDose does the rest, which is super convenient.
The new Complete Reef Care is chemically identical to our original 7-part program and provides the same great results, however, systems with refugium should use Red Sea’s 7-part RCP to properly maintain all elements.
Product Description
The ReefDose Tube Tips allow for quick and easy connection of your dosing tubing to the ReefDose Tubing Holder. They provide a clean and precisely sized dosing tip for extremely accurate dosing of reef additives.
What’s Included?
4x ReefDose Tube Tips
Product Description
The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time.
Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps.
ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea’s ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head’s up before it needs replacing, and even provide you with a daily usage log.
Features
Plug & Play installation with multiple sump setup options.
Easy fleece-mat replacement system.
Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls.
Smart drive unit – connected to the ReefBeat ecosystem.
Solid-State internal and external water level sensors (no moving parts).
Integrated media basket for additional chemical filtration.
Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector.
Note: Suitable for seawater aquariums only
ReefMat 250
Recommended for systems up to 250L
3500l/hr Max. flow capacity per hour
8cm Fleece-mat width
32cm Fleece-mat length
16 x 20 x 49cm Dimensions
Product Description
The ReefRun Dual Controller offers great value as it can run both the REEFER DC Skimmer & ReefRun DC Pump (or two ReefRun DC Pumps) at the same time! The controller is sold separately, enabling the hobbyists to purchase one controller for 2 devices and save significantly, while enabling you to reduce your inventory requirements.
Product Description
Please note: Controller is available to order separately*
Efficient. Quiet. Smart.The REEFER DC Skimmers include self-leveling technology that prevents over-skimming and full cups from spilling while continuing to aerate the water.
Self-Leveling.The Self-leveling feature is activated whenever the wetness of the foam in the neck exceeds the user-adjusted “over-skim” threshold. The intensity of the pump is immediately reduced to prevent the over-skim and then gradually increased or decreased, a bit at a time, according to the foam wetness, until the preset pump intensity is reached and stable skimming is restored.
Quiet.The REEFER DC Skimmers are exceptionally quiet due to the PSK DC Pump, rubber connectors and an air intake silencer.
Optimal waste removal.The REEFER DC Skimmer features a combination of self-leveling tech, a PSK DC pump, proportionally sized venturi, a bubble diffusor and reaction body that optimizes air-water contact time.Optimal air/water ratio and contact time.The diffusion chamber evenly disperses the fine bubbles created by the PSK DC pump across the skimmer cone, without reduction air or water flow.
Sensor to pumpThe REEFER DC Skimmers come with a dual-action solid-state sensor that monitors foam
And use the ReefBeat Quick-actionsCreate your unique Feed scenario by switching selected pumps off or run at different intensities at different times for different durations.
Select the order and timing between switching devices back on after a maintenance shutdown, such as allowing a few minutes for your return pump to restore water levels in sump and aquarium before switching on the skimmer, wave pumps and dosers.
Height
Pump
Air Flow
Water Flow
Recommended Water Height
Power Consumption
RSK 300 DC
53 cm
PSK DC-1200
500 L/ h
1000 L/ h
16 - 20 cm
20 W
RSK 600 DC
56 cm
PSK DC-1200
750 L/ h
1500 L/ h
18 - 20 cm
25 W
RSK 900 DC
59 cm
PSK DC-1200
900 L/ h
2000 L/ h
20 - 24 cm
30 W
Product Description
The ReefATO+ is an exceptionally reliable auto top-off system that includes a highly accurate temperature monitor plus an external leak detector and is supplied with a smart controller and useful ReefBeat features. It has a unique solid-state level sensor, with five titanium probes that can pinpoint if you are above, below, or at the desired water level, along with backup OFF sensors, a fail-safe mechanism that stops the pump if it is operating for too long, and of course ReefBeat notifications if anything is out of the ordinary.
How it Works
The EC technology titanium probes detect the water levels that triggers the pump to be switched on and off to maintain a stable water level and salinity.
Water Level Sensor
Fail-proof (solid-state EC technology) water level sensor, with built-in back-up pump-OFF probes located 2.5cm / 1” above the normal pump-OFF point.
The full array of the Reef-Spec titanium probes gives an indication at all times of the actual water level relative to the sensor, which can be seen on the ReefBeat App at all times.
Temperature Sensor, Logs and Notifications
The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of ±0.1°.
The ReefBeat App allows you to set a narrow “desired” temperature range, and a slightly wider “acceptable” range, that will be seen on-line in the ReefBeat App and in the full temperature logs. In the event that the temperature goes outside the acceptable range you will get a notification to your smartphone.
The detailed logs will show you the minimum, maximum and average temperatures at 15 minute intervals for the past 28 days.
Safe, Powerful and Quiet ATO Pump
• Quiet, variable flow, 12 vdc ATO pump.• Cylindrical design with diameter of 4.5cm / 1.8” to fit inside standard jerrycans.• Max flow rate 300 lph / 75 gph, Max head 2.5m / 8’, power 6–10W.• Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls or RO reservoir runs dry.• Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 72 lph / 18 gph ensuring a splash proof and quiet flow of water into the sump.• The noise damping rubber impellor chamber cover and impellor can be removed for pump maintenance.• Includes lock-nut on the outlet hose barb for secure connection to the silicon tubing.
Leak Detector
The highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes detects the full range of waters from RODI to seawater.
If a leak is detected the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device.
Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Complete Installation Kit
• Sensor holder and magnetic corner mounting bracket for 12mm ½” glass.• 3M /10′ – 1.5mm / 1/16″ thick silicone tubing ID 5mm / 0.2″.• Silent flow – Tube holder, clips on 4 – 12mm / ½” glass.• Siphon Breaker.
Safe.
l-proof (solid-state EC technology) water level sensor with built-in safety shutoff.
Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected.
Product Description
The smart ReefRun DC Pumps can be set to a customized daily schedule, and come with 360-degree rotating outlets, inlet flow guides, extra-long power cables with convenient connectors next to the pump, and a 5-year warranty.
(Requires a ReefRun DC Dual Controller to Operate, sold separately)
ReefRun DC Pump 5500
2000 – 5500 l/h530 – 1450 US gphFlow MIN – MAX
3.5 m / 11.5’Max Height
10 – 40 WWATT
ReefRunDC Pump 7000
3000 – 7000 l/h800 – 1900 US gphFlow MIN – MAX
5.0 m / 16.5’Max Height
20 – 65 WWATT
ReefRunDC Pump 9000
4000 – 9000 l/h1000 – 2500 US gphFlow MIN – MAX
7.0 m / 23’Max Height
30 – 95 WWATT
Integrate your pump into ReefBeat, allowing for customized Feed, Maintenance and Emergency mode Quick Actions.
Be notified if your pump is running dry, disconnected or malfunctioning.
Set a customized daily schedule with varying intensities.
Run two ReefRun DC pumps with your Dual controller, and operate them as a single unit.
Set your pump to operate as a wave pump for use in closed loop wave installations.
The ReefRun Pump comes with a 5-year manufacturer warranty.
Product Description
This kit was designed to be an effective tool for removing the internals of sumps, for cutting and removing silicon & glass panels to enable the installation of the Red Sea ReefMat filter.
Kit Includes:
1x - Utility Blade Handle w/Regular Snap off blade
2x - 0.1 mm Thick Silicon Slicing Replacement Blades
2x - 0.15 mm Thick Silicon Slicing Replacement Blades
1x - Small Silicon Scraper Clean up Tool
Product Description
The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time.
Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps.
ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea’s ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head’s up before it needs replacing, and even provide you with a daily usage log.
Features
Plug & Play installation with multiple sump setup options.
Easy fleece-mat replacement system.
Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls.
Smart drive unit – connected to the ReefBeat ecosystem.
Solid-State internal and external water level sensors (no moving parts).
Integrated media basket for additional chemical filtration.
Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector.
Note: Suitable for seawater aquariums only
