Product Description
The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time.
Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps.
ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea’s ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head’s up before it needs replacing, and even provide you with a daily usage log.
Features
Plug & Play installation with multiple sump setup options.
Easy fleece-mat replacement system.
Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls.
Smart drive unit – connected to the ReefBeat ecosystem.
Solid-State internal and external water level sensors (no moving parts).
Integrated media basket for additional chemical filtration.
Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector.
Note: Suitable for seawater aquariums only
ReefMat 250
Recommended for systems up to 250L
3500l/hr Max. flow capacity per hour
8cm Fleece-mat width
32cm Fleece-mat length
16 x 20 x 49cm Dimensions
Product Description
The ReefRun Dual Controller offers great value as it can run both the REEFER DC Skimmer & ReefRun DC Pump (or two ReefRun DC Pumps) at the same time! The controller is sold separately, enabling the hobbyists to purchase one controller for 2 devices and save significantly, while enabling you to reduce your inventory requirements.
Product Description
Please note: Controller is available to order separately*
Efficient. Quiet. Smart.The REEFER DC Skimmers include self-leveling technology that prevents over-skimming and full cups from spilling while continuing to aerate the water.
Self-Leveling.The Self-leveling feature is activated whenever the wetness of the foam in the neck exceeds the user-adjusted “over-skim” threshold. The intensity of the pump is immediately reduced to prevent the over-skim and then gradually increased or decreased, a bit at a time, according to the foam wetness, until the preset pump intensity is reached and stable skimming is restored.
Quiet.The REEFER DC Skimmers are exceptionally quiet due to the PSK DC Pump, rubber connectors and an air intake silencer.
Optimal waste removal.The REEFER DC Skimmer features a combination of self-leveling tech, a PSK DC pump, proportionally sized venturi, a bubble diffusor and reaction body that optimizes air-water contact time.Optimal air/water ratio and contact time.The diffusion chamber evenly disperses the fine bubbles created by the PSK DC pump across the skimmer cone, without reduction air or water flow.
Sensor to pumpThe REEFER DC Skimmers come with a dual-action solid-state sensor that monitors foam
And use the ReefBeat Quick-actionsCreate your unique Feed scenario by switching selected pumps off or run at different intensities at different times for different durations.
Select the order and timing between switching devices back on after a maintenance shutdown, such as allowing a few minutes for your return pump to restore water levels in sump and aquarium before switching on the skimmer, wave pumps and dosers.
Height
Pump
Air Flow
Water Flow
Recommended Water Height
Power Consumption
RSK 300 DC
53 cm
PSK DC-1200
500 L/ h
1000 L/ h
16 - 20 cm
20 W
RSK 600 DC
56 cm
PSK DC-1200
750 L/ h
1500 L/ h
18 - 20 cm
25 W
RSK 900 DC
59 cm
PSK DC-1200
900 L/ h
2000 L/ h
20 - 24 cm
30 W
Product Description
The smart ReefRun DC Pumps can be set to a customized daily schedule, and come with 360-degree rotating outlets, inlet flow guides, extra-long power cables with convenient connectors next to the pump, and a 5-year warranty.
(Requires a ReefRun DC Dual Controller to Operate, sold separately)
ReefRun DC Pump 5500
2000 – 5500 l/h530 – 1450 US gphFlow MIN – MAX
3.5 m / 11.5’Max Height
10 – 40 WWATT
ReefRunDC Pump 7000
3000 – 7000 l/h800 – 1900 US gphFlow MIN – MAX
5.0 m / 16.5’Max Height
20 – 65 WWATT
ReefRunDC Pump 9000
4000 – 9000 l/h1000 – 2500 US gphFlow MIN – MAX
7.0 m / 23’Max Height
30 – 95 WWATT
Integrate your pump into ReefBeat, allowing for customized Feed, Maintenance and Emergency mode Quick Actions.
Be notified if your pump is running dry, disconnected or malfunctioning.
Set a customized daily schedule with varying intensities.
Run two ReefRun DC pumps with your Dual controller, and operate them as a single unit.
Set your pump to operate as a wave pump for use in closed loop wave installations.
The ReefRun Pump comes with a 5-year manufacturer warranty.
Product Description
The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time.
Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps.
ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea’s ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head’s up before it needs replacing, and even provide you with a daily usage log.
Features
Plug & Play installation with multiple sump setup options.
Easy fleece-mat replacement system.
Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls.
Smart drive unit – connected to the ReefBeat ecosystem.
Solid-State internal and external water level sensors (no moving parts).
Integrated media basket for additional chemical filtration.
Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector.
Note: Suitable for seawater aquariums only
Product Description
DipX is a highly effective dip for safely introducing new corals and live rocks to your aquarium.
A simple 15-minute bath in DipX before placing a new coral in the aquarium will drive away unwanted “hitchhikers”, thereby maintaining the safety of your reef.
Features
Safe for all kinds of corals: SPS, LPS and Soft corals, Zoanthids, mushroom anemones (Discosoma and Ricordea) and live rocks.
Effectively drives away Acropora eating flatworm, Montipora eating nudibranch, Acropora Red Bug and other coral “hitchhikers”.
Slows down RTN and STN (external bath only).
Free of inorganic elements such as potassium iodide or bromide.
Easy to use, reliable and cost-effective
New corals often come with unwanted “hitchhikers” hidden deep inside the corals’ crevices. These various tiny creatures are usually invisible to the naked eye, and once in the aquarium, they can migrate to other corals and damage your delicate reef eco-system.
Over the years, reef hobbyists have used generic baths solutions such as fresh water, Iodine, and even household disinfectants, all of which repel some of the hitchhikers, but not all of them.
For the past few years, we have been cultivating tanks with infested corals and comparing a wide range of commercially available dips and other repelling ingredients, examining both their effectiveness and their overall safety for the corals.
The result is DipX – a unique blend of essential oils, without inorganic disinfectants. Our tests have shown that DipX is completely safe for all kinds of corals and more effective than any other solution we tested.
Corals that were bathed in DipX still repelled unwanted “hitchhikers”, even though they were previously dipped in other solutions On the other hand, corals that were dipped in other solutions after they were bathed in DipX did not repel anything.
Why corals need to be dipped
There are no viable methods for removing specific opportunistic dwellers from an established reef aquarium.
While not all of the incidental hitchhikers are necessarily bad for an artificial reef, some of them quickly become unwelcome guests and therefore it is highly recommended to go with a “better safe than sorry” policy and try to prevent them from getting in. If, however they are already in the system, affected corals and rocks will need to be removed and dealt with one at a time.
Carefully inspecting corals should be part of the regular husbandry routine for a reef aquarium so that any signs of soft tissue damage or discoloration can be identified and investigated as soon as possible. Early detection of the presence of hitchhikers is the most effective way of preventing an uncontrolled outbreak that can potentially harm the entire reef.
Notes for use
Pour DipX into an empty container. Verify the container is both clean and dry beforehand.
Use 10 ml of DipX (diluted 1:100 with aquarium water) to prepare 1L/0.26gallons of bath mix.
Place your new coral or live rock in the container for no more than 15 minutes.
Bath solution can be reused for up to four batches of corals/rocks but should be discarded within 2 hours from preparation.
Product Description
Designed with hobbyist needs in mind, Red Sea’s new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place.
The Control Panel is designed to fit either side of your cabinet, and is made of marine-spec laminated plywood with quick-release stainless steel soft-close sliders, allowing for easy mounting and access to all your equipment.
Features & specs
Marine-spec, 2 cm (0.8”) thick, black laminated plywood panel.
Mounts on both left or right sides.
Quick-release stainless steel soft-close sliders.
Mounting brackets provide 3 cm (1.2″) clearance for hinges.
Available in two sizes:
25 cm (9.8”) x 45 cm (17.7”)
60 cm (23.6”) x 50 cm (19.7”)
Product Description
Deeper. Wider. Stronger.
Red Sea’s ReefLED® series is the result of years of research into the lighting needs of corals in artificial environments.
Features
REEF-SPEC® light output for optimal coral growth and coloration
Homogeneous light with a gentle shimmer
Reef-safe dual-channel color setting plus dedicated moonlights
ReefBeat® app for easy set-up, operation, monitoring & notifications
Anti-glare recessed lens and clip-on visor
Tilt-switch, automatically switches off the light when tilted from horizontal
Pat-pending stadium-shaped lens provides homogeneous light spread
Units can be mounted up to 75cm / 30′ apart for superior coverage
Uniquely designed with a light intensity and spectrum that is 100% utilized by the corals, ReefLED lights are 100% reef-safe & 100% REEF-SPEC®, providing optimal growth, vivid colors, and an elegant gentle shimmer throughout the aquarium.
The ReefLED® 160S is the big brother of the ReefLED series, making corals stand out and sing in even deeper and wider tanks.
The ReefLED 160S combines 160W of REEF-SPEC & Reef-Safe LED light with a patent-pending stadium-shaped lens, creating a beautiful, homogeneous spread throughout an aquarium of 80cm / 32’’ in all three directions. Multiple units can be mounted 75 cm / 30” apart while still guaranteeing a visual uniformity of light across the length of the entire aquarium. Only two units are required for a 150cm / 6″ long tank, or three units for a 225cm / 7.5″ long tank. The 160S is therefore the smart choice for bigger tanks.
At the heart of the unit is a single, compact LED array, providing 160W of REEF-SPEC & Reef-Safe LED light. It includes 140W of multi-wavelength 23,000 Kelvin REEF-SPEC Blue (a proprietary blend of blue, violet and ultraviolet LEDs), together with 20W of 9,000 Kelvin White, and a separate 3W channel for moonlight. This array enables a wide range of REEF–SPEC light that will please both you and your corals.
The ReefLED 160S is also equipped with a built-in Wi-Fi that allows total control via ReefBeat smart aquarium app (which controls all Red Sea devices). The app includes pre-set lighting programs, along with additional features such as sunrise/sunset effects, lunar cycle moon light, random clouds and even an acclimation program for new installations.
Dimensions: 6.9" x 6.1" x 2.5"
Meet the ReefLED™ 160S lights. They're Reef Safe, REEF-SPEC, extremely powerful, and enable exceptional growth and colors in even deeper and wider tanks. This big brother of the ReefLED 50 & 90 combines 160W of REEF-SPEC & Reef-Safe LED light with a patent-pending stadium-shaped lens, creating a beautiful, homogeneous spread throughout an aquarium of 80cm / 32’’ in all three directions. The ReefLED 160S gives superior coverage, as units can be mounted 75cm/30" apart with a guaranteed visual uniformity of light across the entire aquarium. And of course, it comes with all the advantages of the ReefLED series: • Light intensity and spectrum which is 100% utilized by the corals, making them 100% reef safe and 100% REEF-SPEC. • Vivid colors and an elegant gentle shimmer throughout the aquarium. • A built-in Wi-Fi that allows total control via ReefBeat smart aquarium app (which controls all Red Sea devices).
Product Description
ReefDose is designed and built specifically for the daily supplementing of reef aquariums. ReefDose uses bespoke (patent-pending) single-drop-accuracy dosing heads together with an advanced controller that provides a full suite of features.
The “Dynamic Dosing Queue” run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages. With programming through the ReefBeat App, ReefDose offers multiple options for fully automated, easy-set dosing, or a simple schedule of individually planned doses. In addition to the regular flow rate, you can select the “Whisper” mode for almost silent operation, or “Turbo” mode if you want to get the dosing done as quickly as possible.
The ReefDose is part of Red Sea’s ReefBeat smart ecosystem, seamlessly integrating with all other ReefBeat devices.
Features
Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of ± 0.05ml or an average deviation of 0.5% (over 10ml).
2 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule for the complete device.
Easy assembly click-on/off dosing heads (no tools or alignment required).
Automatic delay between the heads to prevent chemical interaction between supplements.
Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml.
On-demand manual dosing.
Secured connectors for flexible tubing: OD 5mm – ID 3mm.
3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min.
Motor life expectancy of 10 years – based on 250ml/day/head.
2 Head Pump Dimensions - 5.1" x 4.1"
4 Head Pump Dimensions - 8.9" x 4.1"
