Product Description Neutral Regulator® adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, and detoxifying ammonia. The use of Neutral Regulator® makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator® with Acid Regulator™ (or Discus Buffer®). To raise pH above 7.0 use with Alkaline Regulator™. All of these products will enhance and stabilize the freshwater aquarium environment. For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish. Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to neutral pH. Use 5 g (1 level teaspoon) for every 40–80 L (10–20 US gallons) once or twice a month (or as necessary to maintain a pH of 7.0.) Neutral Regulator® may be be initially used daily in cases of high alkalinity until 7.0 is established. It may be added directly to the aquarium at any time. Ideally, it should be used when adding or changing water by dissolving in the replacement water. For precise dosing, use the Seachem Digital Spoon Scale.

Read more less

Product Description Malawi/Victoria Buffer™ is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing carbonate hardness, buffer capacity, and pH. It is formulated to maintain a pH of 7.8–8.4. For optimum replication of the Malawi/Victoria Lake environment, use with Cichlid Lake Salt™, Cichlid Trace™, and NutriDiet® Cichlid Flakes. Use 6 g (one level teaspoon) for each 40 to 80 L (10 to 20 US gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks. For precise dosing, use the Seachem Digital Spoon Scale. TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem’s Cichlid Lake Salt™) and between water changes as needed to maintain pH. Seachem’s Malawi/Victoria Buffer™ is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachem’s Acid Buffer™ in combination with Malawi/Victoria Buffer™. To attain a higher pH than 8.4, use Tanganyika Buffer™.

Read more less

Product Description Flourish Trace™ supplies a broad range of trace elements demonstrated to be necessary for proper plant health and growth (see below for signs of deficiencies). Trace elements are normally depleted by utilization, oxidation and precipitation. The latter two processes occur more rapidly than with other micronutrients. This makes it important to restore trace elements on a regular basis. Flourish Trace™ is safe for invertebrates such as shrimp. We normally recommend one start with Flourish® and/or Flourish Tabs™. These provide a broad range of micro-nutrients (vitamins, amino acids) and micro and trace elements (iron, manganese, nickel, cobalt, etc) that will enhance plant health and growth. If the growth rate is substantial the trace elements are often utilized more rapidly than the other components in Flourish®, thus in this case it would be beneficial to also employ Flourish Trace™ along with Flourish® and/or Flourish Tabs™. Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. When using in conjunction with Flourish®, dose on alternate days.

Read more less

Product Description Flourish Tabs™ are growth stimulating tablets for plant roots. They contain essential trace elements, amino acids, and vitamins. They are rich in iron, manganese, magnesium, calcium, potassium, inositol, choline B12, biotin, and other factors that have been determined to be beneficial to aquatic plant roots. They contain no phosphate or nitrate that would promote algae proliferation. Each pack of ten tablets treats a 12 X 30 inch plant bed twice. Perfect for the beginner, Flourish Tabs™ contain all the nutrients found in Flourish® in a dry, tabular form. These tabs are inserted into the gravel, providing direct, time-released fertilization to the plants’ root zone. Nutrients are slowly made available through enzymatic action of the plants’ roots on the tabs. Sizes: 10 count, 40 count Guaranteed Analysis: Soluble Potassium (K2O) 5.8%

Read more less

Product Description Phosphorus is one of the main three macro nutrients (nitrogen, phosphorous, potassium: NPK) required by plants and can often become the limiting factor to growth in a flourishing system. Flourish Phosphorus™ is a safe solution (4,500 mg/L phosphate) of potassium phosphate that takes the guess work out of phosphate dosing. Unlike competing products that mix nitrate and phosphate in a fixed ratio, Flourish Phosphorus™ (being nitrate free) allows you to dose phosphorus according to the needs of your plants without the risk of overdosing nitrates. When used as directed, Flourish Phosphorus™will enhance and accelerate the growth of aquatic plants without enhancing algae growth. For maximum benefit, use with Flourish Nitrogen™ and Flourish Potassium™. Flourish Phosphorus™ is safe for invertebrates such as shrimp. Beginner Use 2.5 mL (half a cap) for each 80 L (20 US gallons) once or twice a week or as needed in response to signs of phosphorus deficiency (e.g. stunted growth, plant dark green). Expert The beginner dose raises phosphorus by 0.05 mg/L (0.15 mg/L phosphate). The ideal phosphate level will vary, but generally ranges from 0.15–1.0 mg/L. Use MultiTest™ Phosphate to monitor phosphate levels. To target a specific phosphate increase, dose according to the following formula: 0.8vp=m, where v= volume of tank in gallons, p=desired phosphate increase and m=volume of product to use in mL. For example to raise 20 gallons to 0.1 mg/L phosphate you would use: 0.8*20*0.1=1.6 mL.

Read more less

Product Description Nitrogen is one of the main three macro nutrients (nitrogen, phosphorus, potassium: NPK) required by plants and can often become the limiting factor to growth in a flourishing system. Flourish Nitrogen™ is a concentrated (15,000 mg/L) blend of nitrogen sources. It provides nitrogen in both the nitrate form and the plant–preferred ammonium form. However, no free ammonia is released because the ammonium in Flourish Nitrogen™ is complexed and unavailable until utilized by the plants. Ammonium becomes available after conversion of urea (carbamide). Flourish Nitrogen™ also provides nitrate for those plants that can readily utilize nitrate as well. For maximum benefit, use with Flourish Phosphorus™ and Flourish Potassium™. Flourish Nitrogen™ is safe for invertebrates such as shrimp. Beginner Use 2.5 mL (half a cap) for each 160 L (40 US gallons) twice a week or as needed in response to signs of nitrogen deficiency (e.g. stunted growth, chlorosis). For smaller doses, please note that each cap thread is approximately 1 mL. Expert The beginner dose raises nitrogen by the same degree that 1 mg/L nitrate would. This dose is sufficient to provide approximately 4 g of growth (dry) or about 20 g (hydrated) over a 1 month period (assuming all other necessary nutrients are provided). For increased growth use proportionately more. To target a specific nitrogen increase, dose according to the following formula: 0.25vn=m, where v= volume of tank in gallons, n=desired nitrogen increase (if using a “nitrate equivalent” value for “n” then use a factor of 0.05 instead of 0.25 in the formula) and m=volume of product to use in mL. For example to raise 20 gallons by 0.20 mg/L nitrogen you would use: 0.25*20*0.20=1 mL. Because one-half of the nitrogen in Flourish Nitrogen™ is from nitrate you can get a reasonable estimate of nitrogen levels by doubling a nitrate reading.

Read more less

Product Description Iron is immobile in plants. This means that plants cannot divert iron from older leaves to new ones. Therefore, deficiency symptoms appear first on new or young leaves. Because plants use iron to produce chlorophyll, a lack of iron results in chlorosis, or yellowing, of the younger leaves. Stems may also appear short and slender. If the deficiency is severe and prolonged, each new leaf emerges lighter in color than the preceding leaf. When choosing an iron supplement, it is important to know the distinction between the two forms of iron. The iron will be in one of two oxidation states: ferrous having a +2 charge, or ferric having a +3 charge. Ferrous iron, the preferred iron form and is soluble in water at any pH. Ferric iron, however, is only soluble below a pH of around 5.5; but if the pH is higher than 5.5, which more than likely it will be in a planted aquarium, the ferric iron will become insoluble and precipitate, settling in the root zone. Once this occurs, foliar absorbtion becomes impossible. To overcome this precipitation, competing products employ a chelate of ferric iron: iron-EDTA. While this does keep it soluble, it has a couple of drawbacks with respect to foliar uptake of iron. (1) Iron-EDTA bonding is very strong, thus very little of the iron will be available to the plants over a given time frame and (2) Physiological energy must be expended by the plant in order to extract the ferric iron from EDTA-iron and then convert (reduce) it to the ferrous form. Our approach is different in that we use a complex (not chelate) of ferrous iron in Flourish Iron™. Flourish Iron™ is a highly concentrated (10,000 mg/L) ferrous iron gluconate supplement. Plants are able to much more easily derive a benefit from Flourish Iron™ because ferrous iron gluconate is already in the ferrous form so they do not expend energy reducing it. Despite what other manufacturers may intimate, gluconate is not harmful to plants or fish. In fact, ferrous gluconate is better suited to foliar feeding than is iron-EDTA owing to the relatively weaker iron-gluconate bonding vs. iron-EDTA bonding. In addition, ferrous gluconate has the added bonus of being a source of carbon. Directions Use 1 capful (5 mL) for each 200 L (50 US gallons) or as required to maintain about 0.10 mg/L iron. For smaller doses please note that each cap thread is about 1 mL. Use MultiTest™ Iron test kit to monitor iron concentrations. Due to rapid utilization, test within 30 minutes. Use as needed to combat signs of iron deficiency (usually seen in new growth) which include: chlorosis (yellowing) of tissue between veins and short and slender stems.

Read more less

Product Description Flourish Excel is a source of bioavailable organic carbon. All plants require a source of carbon. This is typically obtained from CO2, but, may also be derived from simple organic compounds (such as photosynthetic intermediates). The use of either CO2 injection or Flourish Excel does not necessarily negate the use of the other. Because the processes of producing photosynthetic intermediates and building onto them occur simultaneously, one can derive a substantial benefit with the use of Flourish Excel either alone or in conjunction with CO2 . The combination is particularly ideal for situations when continuing to add CO2 could result in dangerously low pH levels. Flourish Excel also has iron reducing properties which promote the ferrous state of iron (Fe+2), which is more easily utilized by plants than ferric iron (Fe+3). Why It's Different The reason plants need CO2 is to produce longer chain carbon compounds also known as photosynthetic intermediates. Photosynthetic intermediates includes compounds such as ribulose 1,5-bisphosphate, and 2-carboxy-3-keto-D-arabinitol 1,5 bisphosphate. Although the names are complicated, the structures are quite simple (5 carbon chains). Flourish Excel does not contain these specific compounds per se, but one that is quite similar. By dosing with Flourish Excel you bypass the involvement of CO2 and introduce the already finished, structurally similar compounds. It is in its structural similarity that Flourish Excel is able to be utilized in the carbon chain building process of photosynthesis. Simple chemical or enzymatic steps can easily convert it to any one to any one of the above named compounds (or a variety of others). Directions On initial use or after a major (> 40%) water change, use 1 capful (5 mL) for every 40 L (10 gallons*). Thereafter use 1 capful for every 200 L (50 gallons*) daily or every other day. Dosing may be slowly increased in high-growth aquariums. For smaller dosing please note that each cap thread is approximately 1 mL.

Read more less

Product Description Flourish Advance™ is an all-natural, biologic growth enhancer for aquatic plants. Its advanced formula contains phytohormones, minerals, and nutrients that dramatically stimulate the growth of both roots and shoots in aquatic plants. Phytohormones are a group of naturally occurring compounds that play crucial roles in regulating plant growth in a wide range of developmental processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth and stress response. Used regularly, it also enhances mineral absorption and improves disease resistance. It is non-toxic and completely safe for all plant varieties as well as for fish and aquatic organisms. During the first ten to fourteen days after application, Flourish Advance™ works to stimulate root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur. Shake well before use. Use 1 capful (5 mL) for every 80 L (20 US gallons). Dose daily or as required to maintain plant growth.

Read more less

Product Description Flourish® is a comprehensive plant supplement for the natural freshwater aquarium. It contains a rich assortment of important micro elements, trace elements and other nutrients. These include calcium, magnesium, iron and other important elements that have been shown to be beneficial to aquatic plants. For macro element (NPK) fertilization, use Flourish® Nitrogen™, Flourish® Phosphorus™ or Flourish® Potassium™ as needed. Flourish® is safe for invertebrates such as shrimp. Flourish® is designed to be used in conjunction with other macro and micro-nutrient supplements. Other manufacturers try to include ALL necessary nutrients, leading to overdoses of micro-nutrients in an attempt to raise macro-nutrient levels. Use 1 capful (5 mL) for each 250 L (60 US gallons) once or twice a week. For smaller doses, please note that each cap thread is approximately 1 mL. Refrigeration is recommended 3 months after opening.

Read more less

Product Description Equilibrium™ is specifically designed to establish the ideal mineral content for the planted aquarium. Equilibrium™ contains no sodium or chloride (which can be detrimental to a planted aquarium at elevated levels). Equilibrium™ is ideally suited for use with RO (reverse osmosis) or DI (deionized) water or any mineral deficient water. Equilibrium™ raises the essential mineral/electrolyte content (General Hardness) of the water to balance with and promote stability of the carbonate hardness. To maintain KH, we recommend Alkaline Buffer™. Unlike competing products, Equilibrium™ contains NO SODIUM CHLORIDE. Both sodium and chloride are not rapidly depleted elements in a planted aquarium, and, in the case of chloride, can do more harm than good. Competitors’ products generally contain primarily sodium chloride (because it is inexpensive), which will raise the electrolyte levels for fish, but can be detrimental to plant growth. In addition, sodium is not a contributing cation to GH levels. Equilibrium™ contains only calcium, magnesium, and potassium salts, which aid in fish metabolism, but are also highly beneficial to plant growth. Equilibrium™ guaranteed analysis and symptoms of deficiency Directions To raise mineral content/general hardness (GH) by 1 meq/L (3 dH), add 16 g (1 tablespoon) for every 80 L (20 US gallons) when setting up an aquarium or when making water changes (add to new water). For optimum solubility we recommend mixing with 1 L (1 qt.) of water (the resulting mixture will have a white opaque appearance). When this mixture is added to the aquarium it will impart a slight haze that should clear within 15–30 minutes. HINTS: Do not use Equilibrium™ when replacing evaporated water. This dose is based on DI or RO water; for other water, measure hardness (GH) first, then add according to need. For precise dosing, use the Seachem Digital Spoon Scale. Plant preferences vary, but a general guide is about 1–2 meq/L (3–6 dH) or match the existing or target carbonate hardness (KH), which, ideally, is also about 1–2 meq/L (3–6 dKH). Equilibrium™ will compact with age, but remains effective.

Read more less