Product Description
XR30 Tank Mount for the G5/G6 Radion XR30 Pro & Blue.
Backward compatible with all previous generations of radions.
Each kit contains everything needed to mount a Radion light on almost any standard or rimless tank.
Each kit contains multiple sliding rails and a rotatable x-bracket, allowing you to easily position your Radion precisely where you need it.
Product Description
Radion XR15 G5/G6 RMS Tank Mount.
Backward compatible with all previous generations of radions.
Each kit contains everything needed to mount a Radion light on almost any standard or rimless tank.
Each kit contains multiple sliding rails and a rotatable x-bracket, allowing you to easily position your Radion precisely where you need it.
Product Description
RMS Radion Mounting SystemModular hanging and mounting solutions for one or multiple radion LED lights
The RMS Hanging Kit provides yet more versatility to the already highly flexible RMS system. With the RMS hanging kit you can suspend a RMS track holding multiple slides and Radions over your aquarium. Ideal for situations where you would like to use the RMS slide and track system but do not have the ability to use the arms. Kit includes brackets and hanging hardware. RMS track sold separately.
The multi-light RMS offers a customizeable multi light mount solution for Radion XR30 and Radion XR15 lights. The multi-light RMS system features
Built-in cable management
Compatible with rimmed, rimless, and eurobraced tanks
Extremely rigid and light
Anodized Aluminum Finish
Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals
Mounts Radions optimally at approximately 7 inches 18cm above glass
Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup.
It’s as simple as A,B and C.
Product Description
Ecotech Marine Radion RMS Mount Hanging Kit Hang Kit is Better for Hanging the RMS Mount
Attractive and Minimalistic
A low profile, sleek design keeps your attention on your tank not on your tank mount.
Super Easy Setup
Heavy Duty
Sturdy metal and plastic construction will last the life of your tank.
Multiple Components for a Clean Look
Adjusts for Fine Tuning
Please note the below image is to show the hanging kit - it does not include the RMS Rail, Slides or Lights.
THIS PRODUCT IS SPECIAL ORDER ITEMS
Product Description
This item is just the rail only
RMS Radion Mounting SystemModular Hanging And Mounting Solutions For One Or Multiple Radion LED Lights
The Multi-Light RMS Offers A Customizeable Multi Light Mount Solution For Radion XR30 And Radion XR15 Lights. The Multi-Light RMS System Features
Built-In Cable Management
Compatible With Rimmed, Rimless, And Eurobraced Tanks
Extremely Rigid And Light
Anodized Aluminum Finish
Flexible Slide Mounts Allow For You To Move And Rotate Your Radion Position To Perfectly Illuminate Your Corals
Mounts Radions Optimally At Approximately 7 Inches 18cm Above Glass
Tanks Come In A Lot Of Shapes And Sizes. To Accommodate The Vast Majority Of Commercially Available And Custom Aquariums The RMS Multi-Light Rails Start At 20.5 Inches And Increase In 10 Inch Increments To 90.5 Inch. The Multi-Light RMS Allows For Adjustment Of The Rail With Respect To The Arms – Meaning That Even If Your Tank Is Not A Common Length – There Is A Rail Length That Will Work For You
*** Track Length Guide ***
Because The Multi-Light RMS Is A Modular System, Choose The Components That Fit Your Needs. To Build A Mount You Will Need A Set Of Arms, The Right Rail For Your Tank And The Number And Model Of Light Mounts That Fit Your Setup.
Product Description
THIS PRODUCT IS SPECIAL ORDER ITEMS
Wetside assembly for VorTech MP10, MP40 and MP60.
**PLEASE NOTE: A SERIAL NUMBER IS REQUIRED
Please email your serial number to: unihillaquarium@gmail.com
Product Description
EcoTech Radion Rail Kit is a modular designed rail kit which provides Radion owners with multiple spacing option when hanging or mounting their light units. The rail kits may be used along with the Premium Hanging Kit.
EcoTech Radion Rail Kit is a sleek way to mount multiple Radion LED Fixtures.
Features: Compatibility with the existing Radion Hanging Kit. Support for multiple Radion LED lighting systems using rail or plus one rail kits. The ability to hang Radions close together or widely spaced. Sleek, lightweight anodized aluminum construction.
Included in the Kit: Rails End Caps Eyelet Cables Nuts Bolts Bushings Technical
Specifications: Length: 18.5inch/469.90mm
Product Description
CO2 is arguably the most important element in the planted aquarium. It is required for respiration and growth by all aquatic plants, used in a process called photosynthesis.
The Single molded Co2 refillable canister is a high-pressure aluminum cylinder suited for Co2 infusion. The special treated aluminum surface provides durability for a professional and safe application. The Dymax Co2 Refillable cylinder is specially design for aquatic use.
Dymax CO2 Aluminum Cylinder 1L - Empty (DM493)
Single molded refillable canister.
High-pressure aluminum cylinder.
Special treated aluminum surface to provide durability.
Professional and safety application.
Made of high-quality material.
Specially design for aquatic use.
PRODUCT DETAILS
Replacement Filter Floss For The DD-Solution SK3000.
The new XL means more filter fleece for your SK-3000 Filter Roller extending the time between changing rolls.
Filter fleece: 40m roll length - 60% longer than the original 25m rolls
ClariSea SK-3000 AUTOMATIC
Filter Fleece: 10cm (4”) Width – Length 40m (82ft)
Particle Size Removal: Down To 20 Microns
Product Description
Reef•Basis - Captiv Phos Fe is a supreme quality, granular ferric oxide based filtration medium particularly selected for sensitive aquarium environments. It is designed to remove free phosphates and silicates that can act as a fertilizer for unwanted algae or diatoms, directly from the water and will also remove phosphate bearing dissolved organics. It will not kill algae and does not contain any algaecides. It is safe for all marine and freshwater life.
Use in aquarium keeping.
Phosphates enter the aquarium primarily through tap water additions for evaporation or water changes, food addition, particularly brine shrimp, some other frozen foods and use of inexpensive carbon. Silicates enter the aquarium primarily through tap water (natural water contains silicates and water companies add sodium silicate to control equipment corrosion), poor salt mixes, and also improperly filtered additives made from tap water. Phosphates and silicates should be first controlled by the use of water made by reverse osmosis or deionization, limiting phosphate bearing foods and use of a good grade of aquarium carbon from a company you trust. Reef•Basis - Captiv Phos Fe should then be employed to reduce the phosphates that remain, to a level of .04 mg/l (ppm) or less.
Directions and protocol.
Rinse well in cold filtered freshwater, preferably RO or distilled water, but tap water may be used. Discard rinse water. Place loosely in a polyester filter bag or filter chamber and position to gently flow water through the medium or use in a fluidized bed filter. For best results, use a particulate prefilter ahead of the Reef•Basis - Captiv Phos Fe, such as filter floss or fine sponge. Use about 1 gram per gallon of aquarium capacity, or about 1/3 cupful per 100 US gallons (400 L).
Product Description
Power•Cleanse HM is a supreme quality, high activity filtration resin particularly selected for adsorption of copper and other toxic metals in marine, brackish and freshwater systems include planted aquariums. It will outperform fiber pads and is more economical because it can be regenerated. Its light colored beads can turn light blue or shades of gray depending on the metals adsorbed and this indicates the need for regeneration. Power•Cleanse HM is regenerable over and over again for a minimum of 2 years in normal use.
Directions and protocol.
Place loosely in a 200 micron polyester filter bag or filter chamber and position to force water flow through the product. For best results, use a particulate prefilter ahead of Power•Cleanse HM, such as filter floss or fine sponge. Use about 4 ml of product per gallon of aquarium capacity, or about 1 cupful per 60 US gallons (230 L).
Regeneration:
Regeneration should only be undertaken by persons familiar with handling strong acids. If you are not familiar and comfortable, them simply discard and purchase new. Warning: WEAR RUBBER GLOVES AND EYE GOGGLES when handling acid!! Add one part muriatic acid (available at pool supply store, observe directions and warnings on acid container) to four parts water (never add water to acid! only add acid to water). Soak resin until original color is restored or about 1 to 2 hours maximum. Discard solution. Rinse resin with fresh water 3 times and discard water. Let stand in water with 2 tablespoons of Reef•Basis KH Buffer or Flora•Viv KH+ or Basis Cichlid Buffer for 1 hour. Rinse again in fresh or salt water and test pH and make sure it is within 1 pH unit of aquarium pH and resuse as before.
Product Description
Shrimp safe, Basis Power•Cleanse XL is a supreme quality high activity synthetic filtration resin particularly selected for sensitive marine or freshwater aquarium environments. Power•Cleanse XL contains huge numbers of mesopores and macropores suited to adsorption of a wide range of organic pollutants with zero impact on trace minerals and pH. Power•Cleanse XL will remove stains, dissolved organics and toxic gases in marine, brackish and freshwater systems. It will outperform carbon in many environments and is more economical because it can be regenerated. It turns brown or shades of yellow indicating exhaustion and need for regeneration. It is regenerable over and over again for a minimum of 2 years in normal use.
Directions and protocol.
Place loosely in a 200 micron polyester filter bag or filter chamber and position to force water flow through the product. For best results, use a particulate prefilter ahead of Power•Cleanse XL, such as filter floss or fine sponge. Use about 2 ml of product per gallon of aquarium capacity, or about 1 cupful per 120 US gallons (450 L).
Regeneration:
Mix all the table salt that will dissolve in a quantity of water sufficient to submerge a micron bag containing the beads. Normally, this will be about 360 grams in 1 Liter of dechlorinated water. (CAUTION!! we don't recommend use of bleach to regenerate this or any resin. It can kill your fish and will damage the any resin). Massage the bag of beads by hand in the brine (wear rubber gloves), until beads return to off white or light cream color - or until they stop lightening. For best results soak them overnight. They will probably never return to snow white again, but this does not hinder their effectiveness. Rinse several times in freshwater. If for use with freshwater fish, it is best to soak them the final time in distilled water to get all remaining salt out. Reuse as before. Discard when they stop being effective (as indicated by color).
Caution: Keep out of reach of children. Not for human consumption. Contains polymeric resin, if ingested drink water. If in eyes flush with water.
