Product Description This test can be used to measure any ionic copper in your source water or to monitor copper levels during parasite treatments. The test kit includes a test cylinder and reagent, plus a color chart to measure the copper, accurate to 0.05 PPM. It can be used with freshwater or marine aquariums and includes enough reagents for 50 tests.

Read more less

Product Description Calcium is a major constituent of calcareous algae, skeletal material of hard corals and the skeletal needles of soft/leather corals. Calcium also fulfills many biological functions.Quite often a too low calcium concentration retards coral and calcareous algae growth.NSW contains 400 – 450 mg/L calcium. Which is also the value we should strive for. For a stable aquarium environment the fluctuation in calcium content should preferably not more than approx. 15 mg/L. This automatically means that the calcium test should be able to monitor comparable fluctuations.Conclusion:In a healthy aquarium growth and multiplication of corals, desired calcareous algae and other organisms results in calcium depletion. Because of the importance of calcium timely corrective measures would have to be taken. For that purpose a proper calcium additive together with an accurate test kit are required.Our calcium testis capable in resolving the calcium content in 10 mg/L steps. The color change is sharp and facilitates the detection of small but highly significant fluctuations in the calcium concentration. Salifert is the only one in offering a true accuracy and precision as claimed.The kit can perform approx. 50 - 100 measurements.Salifert's Coral Calcium additive is manufactured using a very special procedure. This results in a highly concentrated additive that not only makes calcium addition easy, it also avoids that the ionic balance is disturbed when used in combination with our KH + pH Buffer or any other sodium based buffer. Common additives, which contain only calcium chloride or improperly use of kalkwasser (calcium hydroxide), can upset the ionic balance resulting in aquarium water very different from NSW.

Read more less

Product Description For Fresh and Saltwater Ammonia and ammonium are substances which should be converted rapidly into nitrite followed by nitrate and nitrogen gas.If this does not happen then the aquarium is not fully cycled or biological processes are not proceeding as they should.The Salifert Ammonia test is very straightforward and measures the sum of toxic ammonia and ammonium in just a few minutes.The kit can perform approximately 50 measurements and can detect 0.5 ppm of total ammonia easily.

Read more less

Product Description Calcium alone cannot form the skeletal material of corals and allow calcareous algae to grow. Some other substances are needed as well. A few other constituents are carbonate and bicarbonate. These two substances also have a major impact on the stabilization of the pH in the proper range of 8.1 – 8.4. Such stabilization is also called buffering. The total carbonate and bicarbonate concentration is also called carbonate alkalinity or carbonate hardness. The only difference between alkalinity and carbonate hardness is a conversion factor. NSW has an alkalinity of approx. 2.7 meq/L or approx. 7.5 dKH when expressed as carbonate hardness. For a stable system the alkalinity or carbonate hardness should have a value similar to NSW or slightly higher and should preferably not fluctuate by more than 5%. This means a maximum fluctuation of 0.14 meq/L or 0.4 dKH. Therefore an alkalinity test kit should be capable in measuring in steps smaller than 0.14 meq/L. Conclusion: Since the major buffer components used for coral and calcareous algae growth are bicarbonate and carbonate, they should be added to correct any decrease in alkalinity or carbonate hardness. A proper formulated buffer should function in such a way that the corrective measures results in a long lasting effect and should not upset the pH of the system. The alkalinity or carbonate hardness should be kept as stable as possible requiring highly sensitive and accurate means for testing. The Salifert KH/Alk test is very straightforward. It measures in sufficient small steps of 0.1 meq/L or 0.3 dKH with a sharp color change. This makes detection of important yet small change possible. The kit can perform approx. 100 - 200 measurements.

Read more less

Product Description Rowaphos is the leading phosphate removal media for marine and reef aquariums. Rowaphos will not leach any phosphates back into the water. RowaPhos is a unique man made ferric hydroxide material specifically produced for efficient removal of phosphates, arsenic and silicates from fresh and salt water, having initially been developed in Germany for treating mains water supplies. As such it should not be confused with natural materials, which are generally based on aluminium oxide, (zeolite). RowaPhos is manufactured using a Patented process which makes it physically and chemically completely different to the vast array of other iron based media which have sprung up to ride on the sucess of the Rowa product. Most of these products are iron oxide based and have a higher capacity for phosphate than aluminium based medias but do not touch the engineered properties of RowaPhos. In an independent series of tests carried out by the Berlin Technical University on the five most commonly used phosphate removers at the time, RowaPhos was found to be the most efficient in removing phosphate from water. Other medias tested reached only to 30 – 40 % of its removal capacity by weight. Additionally RowaPhos was found to continue to remove phosphates at lower concentrations and had a higher maximum holding capacity.

Read more less

Product Description Red Sea Reefer 225 Micron Thin Mesh Bag SockRed Sea’s 225 micron Thin-Mesh aquarium filter bags 225 micron thin-mesh aquarium filter bags are perfect for new setups and after heavy maintenance or whenever there is a lot of particulate matter in the water. They are also suitable as a holder for other mechanical or chemical filter media. The monofilament construction of these bags makes them very easy to clean. These bags are now used in REEFER and MAX-S Systems

Read more less

Product Description Based on the Gyre patented, cross-flow technology, the ReefWave pumps provide optimal REEF-SPEC® water flow for corals in a wide range of reefscapes, regardless of their position in the aquarium. Silent, powerful, and easy to set up and maintain, the ReefWave pumps can be controlled right from your smartphone using Red Sea’s ReefBeat App, which provides you with a full suite of advanced features. Features Cross-flow technology wave pump for a gentle, evenly distributed flow Silent and energy efficient Sine-Wave DC control motor 5 programmable wave patterns with unique Forward/Reverse/Alternating flow modes Easy assembly/disassembly for maintenance Dedicated Wi-Fi controller for each pump Synchronize multiple pumps of different sizes ReefBeat App for easy set-up, operation, monitoring and notifications ReefWave 25 Specs Flow 1960 GPH 5/8" Glass 4-25 watts 10' Cable Length Recommended 1.5-4 foot Footprint 9" long, 1.6" tall, 2.8" from the glass to the pump edge. ReefWave 45 Specs Flow 3960 GPH 3/4" Glass 8-45 watts Recommended 2-6 foot Footprint 12.4" long, 2" tall, 3.2" from the glass to the pump edge. ReefWave units recommendation

Read more less

Product Description Based on the Gyre patented, cross-flow technology, the ReefWave pumps provide optimal REEF-SPEC® water flow for corals in a wide range of reefscapes, regardless of their position in the aquarium. Silent, powerful, and easy to set up and maintain, the ReefWave pumps can be controlled right from your smartphone using Red Sea’s ReefBeat App, which provides you with a full suite of advanced features. Features Cross-flow technology wave pump for a gentle, evenly distributed flow Silent and energy efficient Sine-Wave DC control motor 5 programmable wave patterns with unique Forward/Reverse/Alternating flow modes Easy assembly/disassembly for maintenance Dedicated Wi-Fi controller for each pump Synchronize multiple pumps of different sizes ReefBeat App for easy set-up, operation, monitoring and notifications ReefWave 25 Specs Flow 1960 GPH 5/8" Glass 4-25 watts 10' Cable Length Recommended 1.5-4 foot Footprint 9" long, 1.6" tall, 2.8" from the glass to the pump edge. ReefWave 45 Specs Flow 3960 GPH 3/4" Glass 8-45 watts Recommended 2-6 foot Footprint 12.4" long, 2" tall, 3.2" from the glass to the pump edge. ReefWave units recommendation

Read more less

Product Description Our high-performance REEF-SPEC® Skimmers feature a combination of PSK pumps with proportionally sized venturi, bubble diffusor and reaction body that optimizes air-water contact time for steady waste removal. Designed with hobbyists needs in mind, the REEFER™ Skimmer is whisper quiet thanks to rubber connectors which dampen the vibrations as well as a robust air silencer. With features like the FoamView™ window, built-in neck cleaner and extra-long valved waste tube, we guarantee an enhanced home reef filtration experience. Features Ergonomic diffusion chamber evenly disperses the fine bubbles created by the PSK pump across the skimmer cone, without reducing air or water flow. Quiet operation, with vibration absorbing components and a large air intake silencer. 3 assembly options for flexible positioning of the pump inlet and regulation valve, according to your sump. FoamView™ window in the collection cup to easily monitor and adjust the foam height. Built-in manual neck cleaner. Sicce Pump Precision geared valve for positive flow regulation. Quick release pump holder for ease of maintenance. Drainage port with 1m valved hose. MODEL RSK – 300 RSK – 600 RSK – 900 Rating SPS (L) 300 600 900 Rating Mixed Reef (L) 600 1200 1800 Rating Fish Only (L) 900 1800 2700 Specifications Sicce Pump PSK600 PSK1000 PSK1200 Specifications Airflow (lph) 500 750 900 Specifications Water Flow (lph) 1000 1500 2000 Space Required A (LxW)cm 23×21 26×24 29×27 Space Required B(LxW)cm 25×18 29×21 32×24

Read more less

Product Description ReefLED individual mounting arms attach firmly onto the reads wall of the tank and can be rotated to the upright position during reefscaping or other tank maintenance.  Available in 3 models to suit your needs.  18 1/4" to 27 1/2"  with a glass thickness up to 3/4".

Read more less

Product Description The ReefLED 50 universal mounting arm is suitable for tank widths 14"-20” (36-51cm)  with a glass thickness of 5/16”-3/8” (8-15mm) and can be rotated from side to side during reefscaping or other tank maintenance.

Read more less

Product Description Years of research and testing are behind Red Sea’s ReefLED™ smart reef lighting system. These lights have been designed to ensure optimal coral growth and dramatic coloration, while creating a gentle shimmer throughout the aquarium. Features REEF-SPEC® light output for optimal coral growth and coloration Homogenous light with a gentle shimmer Reef-safe dual-channel color setting plus dedicated moonlights ReefBeat® app for easy set-up, operation, monitoring and notifications Anti-glare recessed lens Reef LED 90 - Footprint 5.3 x 6.1 x 2.2 Reef LED 50 - Footprint 4.7 x 4.7 x 2 The ReefLED lights are guaranteed to be reef-safe and REEF-SPEC® and are very easy to set up. The built-in wi-fi connects them directly to the internet, enabling you to control them from your smartphone using Red Sea’s ReefBeat® smart aquarium app. At the heart of the unit is a single, compact LED array that includes a multi-wavelength, 23,000 Kelvin “REEF-SPEC Blue” channel (a proprietary blend of blue, violet and ultraviolet LEDs) which, together with an 8,000K White channel, provides a reef-safe range of color temperatures that enable all corals to flourish. In addition, a separate dedicated 3W moonlight channel provides low levels of light for reef-safe night-time viewing. ReefLED also includes an optical-glass, hollow lens that ensures a homogenous light spectrum with ideal PAR values throughout the aquarium, without hotspots or areas with insufficient light for coral growth. Reef-Safe and REEF-SPEC:ReefLED provides the precise intensity and spectrum of light that are actually used by corals. The single compact L.E.D. array includes a multi-wavelength “REEF-SPEC Blue” channel (a proprietary blend of blue, violet and ultraviolet LEDs) which together with an 8,000K White channel provides a reef-safe range of color temperatures that enable all corals to flourish. ReefLED also includes an optical-glass, hollow lens that ensures a homogenous light spectrum with ideal PAR values throughout the aquarium, without hotspots or areas with insufficient light for coral growth. Easy set-up and control:The ReefBeat app provides a number of preset lighting programs you can choose from as well as additional features including sunrise/sunset effects, lunar cycle moonlights, random clouds and an acclimation program for new installations. ReefBeat also provides best-practice guidelines during setup as well useful notifications to your smartphone, for example, in the event of a power outage.Two models to choose from: The ReefLED 90 includes 80W of REEF-SPEC Blue, 10W of 8,000 Kelvin White & 3W of dedicated moonlight and is suitable for aquariums of up to 65cm depth. The ReefLED 50 includes 40W of REEF-SPEC Blue, 10W of 8,000 Kelvin White & 3W of dedicated moonlight and is suitable for aquariums of up to 50cm depth. ReefLED is controlled by Red Sea’s ReefBeat app which provides a number of preset lighting programs you can choose from as well as additional features including sunrise/sunset effects, lunar cycle moon light, random clouds and even an acclimation program for new installations. ReefBeat also provides best-practice guidelines during setup as well as useful notifications to your smartphone, for example, in the event of a power outage.

Read more less