Product Description
CO2 is by far the number one cause to low pH in household aquariums. Ambient CO2 can vary from building to building and depending on your location it may not be practical to keep your windows open or pull fresh air from outside into the skimmer. By relocating your protein skimmer?s air intake from the silencer over to the CO2 scrubber can actually increase your tanks pH by a couple points. Depending on the amount of ambient CO2 in the room it is not uncommon for tanks to raise from 7.8 pH up to 8.3 pH within a couple days but results can vary.Size S 1L: 100x100x200mmSize M 2L: 100x100x350mmSize L 3L: 120x120x350mmSize XL 5L: 160x160x320mm
Product Description
Double gauge C02 regulator+solenoid+bubble counter
It is more easier to control with precise pressure reducing valve and the needle valve. The bubble counter has the non-return function. New design washer, no need wrench. It is used for the upper shedding cyclinder.
DICI Compact Single Gauge 5 Carbon Dioxide Injection regulator with needle valve and electromagnetic solenoid valve.
The new DICI Compact Single Gauge 5 is a great little unit boasting all of the features it's big brother has without the size. To keep you well informed the Compact is equipped with two little 2.5cm gauges showing regulator and cylinder pressure. Of course as one would expect it is equipped with a fine tuning needle valve and our units now come standard with an alloy/glass bubble counter with built in check valve so you can accurately measure your drop rate. The Compact unit marries beautifully to the CO2PRO 0.82L cylinder making it the perfect little Nano unit but in reality it's certainly not limited to Nano applications, you can connect this bad boy to any size cylinder you like, the sky's the limit.
Features:
Twin 1.5cm pressure gauges which read both regulator pressure and cylinder pressure.
DICI Aqua Electronic Solenoid Valve for automatic ON/OFF.
Alloy body.
Supplied with the CO² bubble counter as pictured.
Silent operation.
Low power consumption.
Fine tune needle valve.
Supplied with spare rubber O-ring
To suit Australian Standard AS2473 Type 30 cylinder taps (as per all DICI cylinders).
Product Description
Double gauge C02 regulator+solenoid+bubble counter
It is more easier to control with precise pressure reducing valve and the needle valve. The bubble counter has the non-return function. New design washer, no need wrench.
DICI 'Compact' Carbon Dioxide Injection regulator with needle valve and electromagnetic solenoid valve.
The new 'compact' CO2PRO is a great little unit boasting all of the features it's big brother has without the size. To keep you well informed the Compact is equipped with two little 2.5cm gauges showing regulator and cylinder pressure. Of course as one would expect it is equipped with a fine tuning needle valve and our units now come standard with an alloy/glass bubble counter with built in check valve so you can accurately measure your drop rate. The Compact unit marries beautifully to the CO2PRO 0.82L cylinder making it the perfect little Nano unit but in reality it's certainly not limited to Nano applications, you can connect this bad boy to any size cylinder you like, the sky's the limit.
Features:
Twin 1.5cm pressure gauges which read both regulator pressure and cylinder pressure.
DICI Aqua Electronic Solenoid Valve for automatic ON/OFF.
Alloy body.
Supplied with the CO² bubble counter as pictured.
Silent operation.
Low power consumption.
Fine tune needle valve.
Supplied with spare rubber O-ring
To suit Australian Standard AS2473 Type 30 cylinder taps (as per all DICI cylinders).
Product Description
These series are made of high quality brass and aluminium, each vent hole is equipped with a trim valve, it can adjust the gas output accurately.
Product Description
These series are made of high quality brass and aluminium, each vent hole is equipped with a trim valve, it can adjust the gas output accurately.
Product Description
DicI CO2 Bubble Counter DC06-03
With lock-nut design system, the bubble counter can effectively lock the C02 hosing and prevent the loose. Clearly shows the output of C02. (With function of non-return)
Bubble counters with built in Check Valve are essential for determining the amount of CO2 that we inject into planted Aquariums.
This device mounts directly onto to a CO2 Regulators needle valve. Remove an end cap and fill 3/4 with water. When installed it accurately measures the drop rate (drops p/sec). Has a built in Check Valve to prevent back flow into the regulator.
This unit comes with the little o-ring required for the needle valve port just in case your needle valve doesn't have one. All CO2PRO regulators / Smart Alloy Splitters come equipped with o-rings preinstalled for your convenience.
Product Description
Phos 0.04 is a new mixed granulate that safely removes phosphates and yellow matter from the aquarium circuit. The safety of using Phos 0.04 is unique, because the PO4 value cannot fall to 0.00. That is why Phos 0.04 is safe, but at the same time extremely effective. Color and nutrients are firmly bound to the material and not released again, which means that the nutritional value of the aquarium can be kept very low. Unwanted algae growth is effectively prevented and corals can develop their natural colors.
Application and dosage
Always apply carefully to the aquarium!
Use 50 ml Phos 0.04 per 100 liters of water.
After 5 days you can increase the amount to 100 ml per 100 liters of water.
Check the PO4 content regularly with the FaunaMarin PO4 test set.
It is not advisable to use PHOS 0.04 with the low PO4 values.
It is best to use PHOS 0.04 behind a UV treatment plant and after fine filtration in a fluid bed reactor.
The flow rate can best be regulated at 100 - 200 liters / h. The slower the better.
If the PO4 content increases again, replace UltraPhos 0.04 with new material.
Available Fauna Marin Phos 0.04 packages
Fauna Marin Phos 0.04 475 grams
Fauna Marin Phos 0.04 900 grams
THIS PRODUCT IS SPECIAL ORDER ITEMS
Product Description
Compatible with A160, A360 & AP700 (TWO Required for AP700)
For rimmed and rimless tanks, the new Mounting Arms are fully adjustable, compatible with A160 and A360 series, and offer better cable management. (Part# KSAGN01 Kessil Mounting Arm)
*For acrylic or euro-braced aquariums there will be separate accessory, the Extension Mount, that allows you to attach the Mounting Arms directly to the stand. (Part# KSAEM01 sold seperate)
Product Description
Deeper. Wider. Stronger.
Red Sea’s ReefLED® series is the result of years of research into the lighting needs of corals in artificial environments.
Features
REEF-SPEC® light output for optimal coral growth and coloration
Homogeneous light with a gentle shimmer
Reef-safe dual-channel color setting plus dedicated moonlights
ReefBeat® app for easy set-up, operation, monitoring & notifications
Anti-glare recessed lens and clip-on visor
Tilt-switch, automatically switches off the light when tilted from horizontal
Pat-pending stadium-shaped lens provides homogeneous light spread
Units can be mounted up to 75cm / 30′ apart for superior coverage
Uniquely designed with a light intensity and spectrum that is 100% utilized by the corals, ReefLED lights are 100% reef-safe & 100% REEF-SPEC®, providing optimal growth, vivid colors, and an elegant gentle shimmer throughout the aquarium.
The ReefLED® 160S is the big brother of the ReefLED series, making corals stand out and sing in even deeper and wider tanks.
The ReefLED 160S combines 160W of REEF-SPEC & Reef-Safe LED light with a patent-pending stadium-shaped lens, creating a beautiful, homogeneous spread throughout an aquarium of 80cm / 32’’ in all three directions. Multiple units can be mounted 75 cm / 30” apart while still guaranteeing a visual uniformity of light across the length of the entire aquarium. Only two units are required for a 150cm / 6″ long tank, or three units for a 225cm / 7.5″ long tank. The 160S is therefore the smart choice for bigger tanks.
At the heart of the unit is a single, compact LED array, providing 160W of REEF-SPEC & Reef-Safe LED light. It includes 140W of multi-wavelength 23,000 Kelvin REEF-SPEC Blue (a proprietary blend of blue, violet and ultraviolet LEDs), together with 20W of 9,000 Kelvin White, and a separate 3W channel for moonlight. This array enables a wide range of REEF–SPEC light that will please both you and your corals.
The ReefLED 160S is also equipped with a built-in Wi-Fi that allows total control via ReefBeat smart aquarium app (which controls all Red Sea devices). The app includes pre-set lighting programs, along with additional features such as sunrise/sunset effects, lunar cycle moon light, random clouds and even an acclimation program for new installations.
Dimensions: 6.9" x 6.1" x 2.5"
Meet the ReefLED™ 160S lights. They're Reef Safe, REEF-SPEC, extremely powerful, and enable exceptional growth and colors in even deeper and wider tanks. This big brother of the ReefLED 50 & 90 combines 160W of REEF-SPEC & Reef-Safe LED light with a patent-pending stadium-shaped lens, creating a beautiful, homogeneous spread throughout an aquarium of 80cm / 32’’ in all three directions. The ReefLED 160S gives superior coverage, as units can be mounted 75cm/30" apart with a guaranteed visual uniformity of light across the entire aquarium. And of course, it comes with all the advantages of the ReefLED series: • Light intensity and spectrum which is 100% utilized by the corals, making them 100% reef safe and 100% REEF-SPEC. • Vivid colors and an elegant gentle shimmer throughout the aquarium. • A built-in Wi-Fi that allows total control via ReefBeat smart aquarium app (which controls all Red Sea devices).
Product Description
ReefLED individual mounting arms attach firmly onto the rear wall of the tank and can be rotated to the upright position during reefscaping or other tank maintenance. Set at the correct height above the aquarium, the mount arm can be adjusted to suit tank widths of 57-80cm (22.5"-32") and with glass thickness of 8-19 mm / 5/16" - 3/4"
