Product Description
Interchangeable with most residential/aquarium RO or RO/DI systems.
- Remove chlorine, organics, taste and odor- Dual-purpose - combination sediment and carbon filter- Excellent service life- No channeling or bypassing of fluids- Meet NSF Standards- 0.5uM carbon block filters remove trihalomethanes, low levels of chloramine, pesticides, volatile organic chemicals and 99.95% of giardia and cryptosporidium cysts.
Please Note: Flush for minimum of 5 minutes prior to use
Product Description
PRE-ORDER Item
Ecotech Marine extend into precise peristaltic dosing pump. The Dosing pump can also be used for water changes making it simple and stable.Specifically designed peristaltic pump from Ecotech Marine.Ecotech Versa Pump Pack of 4 with Base Its all about the Base
While you could easily purchase single Versa Dosing Pumps, the pack with the base gives two major advantages.Firstly - there is just the one power pack rather then 4 with individual units to plug into power points.Secondly - The base allows you also manually adjust the pumps for ease of use.
Specifically designed peristaltic pump from Ecotech Marine.
The Versa is extremely precise, robust and versatile.
Capable of being used as a dosing pump, as an auto top off (ATO) pump and even for automatic water changes.
The Versa Pump can be controlled via the Ecotech App - Mobius Control and allows you to have full control at your finger tips.
This is a major improvement over the complex programming previous dosing pumps used.
As each unit is fully controllable, this means you can purchase either one or a few and run exactly what you need for you aquarium.
Min dosing volume:
0.5ul/min
Max dosing volume:
300ml/min
Accuracy:
+/- .2ml for quantities of 1ml of less
+/- 1% for quantities of 1-300ml
Vertical Head Pressure:
18+ft (6m)
Connector Options:
1/4" stem for push-to-connect fittings, 1/4" female push-to-connect female, 1/4" barb for soft-wall tubing (denotes accessory)
Tubing:
1/4" OD Polyethylene-Style Tubing for push-to-connect fittings or 1/4" OD soft-wall tubing for barb fitting
Product Description
Ecotech Marine extend into precise peristaltic dosing pump. The Dosing pump can also be used for water changes making it simple and stable.Ecotech Versa PumpSpecifically designed peristaltic pump from Ecotech Marine.
The Versa is extremely precise, robust and versatile.
Capable of being used as a dosing pump, as an auto top off (ATO) pump and even for automatic water changes.
The Versa Pump can be controlled via the Ecotech App - Mobius Control and allows you to have full control at your finger tips.
This is a major improvement over the complex programming previous dosing pumps used.
As each unit is fully controllable, this means you can purchase either one or a few and run exactly what you need for you aquarium.
Min dosing volume:
0.5ul/min
Max dosing volume:
300ml/min
Accuracy:
+/- .2ml for quantities of 1ml of less
+/- 1% for quantities of 1-300ml
Vertical Head Pressure:
18+ft (6m)
Connector Options:
1/4" stem for push-to-connect fittings, 1/4" female push-to-connect female, 1/4" barb for soft-wall tubing (denotes accessory)
Tubing:
1/4" OD Polyethylene-Style Tubing for push-to-connect fittings or 1/4" OD soft-wall tubing for barb fitting.
Kamoer Dosing Line Pack of 4 x 2m
3mm ID x 5mm OD
Specification: ID 3.0xOD 5.0mm, With an ID of 3.0mm and OD of 5.0mm, this tubing offers a snug fit for optimal flow and pressure.
Compatibility: Kamoer F4 PRO/X1 PRO2/X4 PRO/X5S/X4/X4 PLUS/F4 Pump,Designed for a wide range of Kamoer pumps, this tubing is a versatile fit for various models.
Material: Silica gel,Crafted from durable silica gel, this tubing resists wear and tear, ensuring long-lasting performance.
Product Description
The Kamoer X1 Liquid Dosing Pump is the latest state of the art controllable liquid dosing pump from Kamoer. Each X1 is integrated with Bluetooth for complete control via mobile device (iPhone or Android). An easy to use app intuitively sets up single or multiple X1 pumps to any desired dosing regimen.
Flexible and precise control of liquid additions to your aquarium. Easy to use mobile interface make set up a breeze.
Dosing Channel: 1Dosing Times: 12 times / day -once / 31 daysFluid Volume: .1ml - 6000mlAccuracy: <+/-2%Pump Life: >2000 hours
Add multiple X1 pumps to control
Flow calibration setting
Operational modes (Manual, Auto Quick Setting)
Easy setting - Set dosing start and stop time (does not have to be 24 hours)
Enter total number of ml to be dosed over the time period
Enter the number of times to dose each time period (up to 12 times)
User can even choose dosing every 1 - 31 days or certain days per week
Adjustable dosing volume Auto Mode: 0.5 - 6500.0ml
Adjustable dosing volume Manual Mode: 0.1 - 6000.0ml
Delay setting between channels prevents chemical interference
*Requires Bluetooth capable mobile device to operate.
Inside the package:
X1 dosing pump
Graduated cylinder
Power adapter
Product Description
Kamoer X1 Pro T2 - Stepper Pump
X1 PRO T2 is remotely controlled via a mobile phone App, using a long-life stepper motor, which can be used as a dosing pump or a calcium reaction pump.
When used as a dosing pump, it can flexibly and accurately replenish various elements required for the growth of marine organisms, such as calcium, magnesium, KH enhancer, trace elements, etc., to the marine biological tank. Through automatic addition, the workload of manual addition can be greatly reduced, and errors such as missed addition, excessive addition or insufficient addition caused by manual addition can also be avoided.
When used as a calcium reaction pump, it can provide a stable flow of water to the calcium reactor.
Use it as a titration pump or a Calcium Reactor pump!
It can flexibly and accurately add various elements needed by marine organisms to sustain a balanced biological system as a titration pump—trace elements such as calcium, magnesium, KH lifting agent, trace elements, and more. In addition, as a calcium reactor pump, it can provide stable flow through the calcium reactor.
Note: Requires WiFi capable mobile device to operate.
Product Description
X2SR is a water change system that can remotely control it through the mobile phone App using WiFi. The automatic water replenishment function can be completed through the submersible pump interface. To mitigate possible overflow risks, X2SR comes standard with an anti-overflow sensor. When the water level reaches the anti-overflow sensor, an alarm will be triggered, and the water supply and change will stop.
Basic Parameters
Flow: More than 900ml/minPower Adapter Input: 100VAC -240VACOutput: DC24V 1.9ANumber of dosing: 24 times/day-1 time/99 daysInterface: WiFi (App remote control)Working environment: Temperatures: 0 - 70℃; Humidity: 10% - 90% (non-condensation)Dimensions (L*W*H): 168*177*223mm (including pump head)Weight: 4.106KG (not including power supply)Max Head Pressure: 32ft
Packing List
X2SR ×1
Power adapter body (DC24V 1.9A)
Power adapter plug (US/UK/EU/AU)
Plastic cylinder (50ml)
PVC tube 9.5*12.5mm; green 6m
Kamoer tube manifold Transparent
Float level sensor(headphone plug)
Float level sensor bracket
Magnet (black)
A submersible pump(DC 24V)
Male-to-male line
12 PVC connecting pipe for auto top-off 8*11mm transparent 1.5m
Anti-siphon connector(1/4 straight)
Grease ×10g
Quick start guide
Qualified certification
More Details
The outlet of drain pump, connect to wastewater bucket
Inlet of drain pump, connect to the fish tank
The outlet of refill pump, connect to the fish tank
The inlet of the refill pump, connect to fresh seawater
DC24V pump, connect to submersible pump
Liquid level sensor for detecting whether freshwater is empty
Liquid level sensor for detecting whether wastewater is full
Anti-overflow sensor for detecting whether the tank reaches the warning water level
The liquid level sensor used to maintain the normal water level of the fish tank
Reset button for configuring the network
DC24V IN, power input
Drain pump running indicator
Power/Wi-Fi status indicator
Refill pump running indicator
The button of Drain pump, long-press the button to run
The button of Refill pump, long-press the button to run
Precautions
★ Please use the product's own power adapter and work in the specified working environment.★ This product only supports 2.4G Wi-Fi, not 5G Wi-Fi.★ Perform flow calibration before using the device to ensure that the water output is the same as the water input when changing water.★ The connecting pipe for the liquid inlet should be as short as possible, and the connecting pipe for the liquid outlet should be suspended above the tank.★ Please carefully check whether the connection direction of the water inlet and outlet is correct, and do not connect them in reverse.
Product Description
The Kamoer X4 PRO Wifi Doser Liquid Dosing Pump is the first remote dosing pump with OLED display. With the remote app or via local button control, the X4 PRO can flexibly and accurately replenish the aquarium with the various elements needed for the growth of marine life.
Remote control is available through the easy to use Kamoer mobile app for Android or IOS.
Features:
WIFI Control of dosing Pump via iOS or Android devices
Built in temperature detection
Built in OLED display
Local control via button
Remote control via app
4 x dosing heads
Fluid Volume: 0.1ml-9,999ml
Accuracy: <+/-0.5%
Software update via WIFI
Battery back up - Settings saved if power lost
Uses high quality PharMed® BPT Tubing in pump heads
Flow rate calibration for each pump
Dimensions: 285 x 90 x 60mm
Dosing Functions:
1-24 dosing times per day.
User defined start/stop Dosing Period per day (does not have to be 24 hours, for example, you can set to auto dose from midnight to 6am only).
Daily/every 'x' days or specified days of the week.
Auto/Custom/Manual dosing options.
Anti-interference delay between pump dosing.
Monitors the amount of liquid remaining in each dosing container.
Product Description
The X5 S is the first 5 channel WiFi dosing pump from Kamoer. With the app remote control, the X5 S dosing pump can flexibly and accurately replensih the aquarium with the various elements needed for marine life. These pumps have been developed by Kamoer, a company with a strong reputation for the manufacture of medical grade dosing equipment, ensuring a high quality product with excellent reliability.The pump will provide simple, flexible and precise control of supplement additions to your aquarium through the easy to use Kamore remote mobile App (Android and IOS).
Features:
5 dosing heads
Remote control via iOS or Android app
Waterproof connectors
Colourful pump heads with high quality pharm tube
Built in temperature detection
Each pump head can calibrate flow rate rate
Fluid Volume: 0.1ml-9,999ml
Accuracy: <+/-0.2%
Upgrade firmware via OTA
Battery back up - Settings saved if power lost
Dimensions: 285 x 91 x 60mm
Dosing Functions:
1-24 dosing times per day.
Auto/Manual dosing options.
User defined start/stop Dosing Period per day
Daily/every 'x' days or specified days of the week.
Anti-interference delay between pump dosing.
Monitors the amount of liquid remaining in each dosing container and sends a push notification to the users phone when it is insufficient
Monitors temperature and sends a push notification to the users phone when the setting range is exceeded.
Product Description
The ReefATO+ is an exceptionally reliable auto top-off system that includes a highly accurate temperature monitor plus an external leak detector and is supplied with a smart controller and useful ReefBeat features. It has a unique solid-state level sensor, with five titanium probes that can pinpoint if you are above, below, or at the desired water level, along with backup OFF sensors, a fail-safe mechanism that stops the pump if it is operating for too long, and of course ReefBeat notifications if anything is out of the ordinary.
How it Works
The EC technology titanium probes detect the water levels that triggers the pump to be switched on and off to maintain a stable water level and salinity.
Water Level Sensor
Fail-proof (solid-state EC technology) water level sensor, with built-in back-up pump-OFF probes located 2.5cm / 1” above the normal pump-OFF point.
The full array of the Reef-Spec titanium probes gives an indication at all times of the actual water level relative to the sensor, which can be seen on the ReefBeat App at all times.
Temperature Sensor, Logs and Notifications
The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of ±0.1°.
The ReefBeat App allows you to set a narrow “desired” temperature range, and a slightly wider “acceptable” range, that will be seen on-line in the ReefBeat App and in the full temperature logs. In the event that the temperature goes outside the acceptable range you will get a notification to your smartphone.
The detailed logs will show you the minimum, maximum and average temperatures at 15 minute intervals for the past 28 days.
Safe, Powerful and Quiet ATO Pump
• Quiet, variable flow, 12 vdc ATO pump.• Cylindrical design with diameter of 4.5cm / 1.8” to fit inside standard jerrycans.• Max flow rate 300 lph / 75 gph, Max head 2.5m / 8’, power 6–10W.• Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls or RO reservoir runs dry.• Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 72 lph / 18 gph ensuring a splash proof and quiet flow of water into the sump.• The noise damping rubber impellor chamber cover and impellor can be removed for pump maintenance.• Includes lock-nut on the outlet hose barb for secure connection to the silicon tubing.
Leak Detector
The highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes detects the full range of waters from RODI to seawater.
If a leak is detected the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device.
Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Complete Installation Kit
• Sensor holder and magnetic corner mounting bracket for 12mm ½” glass.• 3M /10′ – 1.5mm / 1/16″ thick silicone tubing ID 5mm / 0.2″.• Silent flow – Tube holder, clips on 4 – 12mm / ½” glass.• Siphon Breaker.
Safe.
l-proof (solid-state EC technology) water level sensor with built-in safety shutoff.
Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected.
