Product Description Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer.  As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water. Why It's Different What distinguishes Acid Buffer from other buffers is that it does not contain phosphates. This makes it ideal for the planted aquarium, where excess phosphate could contribute to undesirable algae growth. Directions To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart. HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.

Read more less

Product Description Seachem Acid Regulator Adjusts Ph 4.5-6.8. Acid Regulator adjusts pH to the acidic range (4.5 – 6.8) and softens water by precipitating calcium and magnesium. Acid Regulator adjusts pH to the acidic range (4.5 – 6.8) and softens water by precipitating calcium and magnesium. Acid Regulator supports the establishment of the optimal environment for all acid acclimated species (e.g. neons and other tetras, etc.). For further freshwater environment enhancement, use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish. Directions Use 1 level teaspoon (5 g) for every 40 L (10 US gallons) daily until intended pH is reached. For precise dosing use the Seachem Digital Spoon Scale. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator®. To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.

Read more less

Product Description The Alert Combo™ pack combines Ammonia Alert® (1 card) and pH Alert® (1 card). Ammonia Alert® and pH Alert® are almost half the size of competing products. At 1.5" x 2.5", they are small, clear, and unobtrusive, so they won't detract from the view of your aquarium. Simply place Ammonia Alert® and pH Alert® visibly anywhere in the aquarium or filter. It’s that easy. No chemicals or test procedures are required. Ammonia Alert Ammonia Alert's® sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. It detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to go from TOXIC to SAFE on removal of ammonia. Marine or freshwater use. pH Alert pH Alert® is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly from yellow to orange to red alerting you to shifts in pH levels between 5.4 and 8.0. When first put in service, pH Alert® response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes. Freshwater use only.

Read more less

Product Description The Seachem Algae Pads are non-scratch algae pads for glass & acrylic. The melamine foam uses micro abrasive technology to easily remove algae from the sides of your aquarium. They are particularly effective at removing algae from scratches. They are chemically inert and do not use soaps or detergents. Their white color contrasts against dark algae making it easier to see when areas are fully clean. More on Melamine Melamine foam is incredibly effective abrasive cleaner. It has a microstructure as hard as glass, but because of its open-cell structure it remains flexible. It performs on stains a lot like extremely fine sandpaper. In the aquarium, it easily removes algae by scraping with its extremely hard microscopic filaments. Sizes: 4.5" x 1" x 2.5" (3 Pack)

Read more less

Product Description The Seachem Algae Scraper is designed with versatility in mind. With three retractable blades: metal, plastic, and soft pad, it is suited for both glass and acrylic aquariums. It is lightweight and features an ergonomic handle making it comfortable to hold in multiple positions. In addition, it floats for easy retrieval. Finally, its white color makes it easy to see the algae you want to remove and when you’ve effectively removed it. Ergonomic handle allows for easy use in multiple positions Retractable blade housing safely hides blade while not is use. White design contrasts with algae so you can see what you are removing Floats for easy retrieval Handle hole for hanging storage Sizes: 6 inches (15 cm), 12 inches (31 cm), 18 inches (46 cm)

Read more less

Seachem Algae Scraper Replacement Blade Refill - 3 Pack The Seachem Algae Scraper replacement metal blade is designed for: Seachem 3 in 1 Algae Scraper 31cm Seachem 3 in 1 Algae Scraper 46cm Includes: 3 x Replacement metal blades - Easily removes tough algae in glass aquariums. Not for use on acrylic. Seachem Product Code - 3212  

Read more less

Product Description Alkaline Buffer™ is a non–phosphate buffer to raise pH and alkalinity (KH) and buffer with Acid Buffer™. These buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Alkaline Buffer™ raises pH and buffers between 7.2 and 8.5. It is gentle, safe, and enhances the freshwater environment. Direction To increase pH, use 1 teaspoon (6 g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer™ with Acid Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart. HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.

Read more less